Hi all. I've been searching on and off for a few days, but my google-fu has come up short. Wondering if someone out there could let me know if it's possible / how to wire a 3 pickup Strat like this: 3-way Gibson-type switch for Neck, Neck/Bridge and Bridge 1 Volume for all 3 pickups 1 Neck Tone: push-pull for Middle pickup on/off 1 Middle/Bridge Tone: push-pull for Middle pickup in series/parallel with the Bridge Kind of a modified Robbie Robertson scheme, I guess. Middle pickup would only function when turned on and then only in series or parallel with the Bridge. My soldering skills are okay, but wires and switching are a bit of a mystery without a diagram, unfortunately.