Wiring diagram for esquire - one volume, no tone, no switch

[Mind Flayer]

Can anybody provide or direct me to a wiring diagram for an esquire with one volume knob, no tone knob, and no switch?

 

[Mind Flayer]

Nm, think I found one.

 

[Dragontele47]

https://guitarelectronics.com/1-humbucker-1-volume/

Same diagram for a single coil.

 

[Mike Simpson]

http://www.tdpri.com/threads/esquire-wiring.805239/#post-8178482

 

[LowCaster]

A regular Esquire with would have no cavity shielding, and possibly no ground wire from the bridge. The bridge would be connected to ground through the pickup baseplate and black wire... Similarly, the control plate is connected to ground by direct contact with the volume pot.

Otherwise, any ground wire should be soldered to the back of the volume pot.
image removed

 

[Rob DiStefano]

a string ground shouldn't be optional, as without one you'd realize it's more like mandatory.

 

[Mind Flayer]

For the ground, can't I just have a wire from the volume pot to the underside of the bridge?

 

[Rob DiStefano]

For the ground, can't I just have a wire from the volume pot to the underside of the bridge?

yessir!

 

[LowCaster]

Sure, I didn't mean that the string ground is optional, but that any supplementary grounding or shielding would connect there.

Just to be clear: if you are using a regular telecaster bridge and a tele pickup with a metal baseplate, the strings ought to be grounded already.