The Andy Summers CS wiring with 4 way switch/series option

FatKnife

Tele-Meister
Joined
May 9, 2009
Posts
159
Location
Nashville TN
All of the parts are on the bench. Toggle is already mounted on the control plate. CS wiring layout and Fender switch diagram are on hand.
This seemed like a cool idea or twist on the project at the time. Trying to make sense of combing the two layouts.
With a neck humbucker, will I have to break apart the soldered ground on the cover as I’ve seen in videos for two single coils with a series option?
I am seeing that there will be an additional ground required for series wiring.
Was hoping to avoid too much modding on the humbucker if it can be avoided.
 

FatKnife

Tele-Meister
Joined
May 9, 2009
Posts
159
Location
Nashville TN
After some consideration, I decided to go with a 3 way switch and the conventional wiring layout for the Andy tele. Maybe I’ll do a 4 way switch mod for something in the future.
 

guitarbuilder

Telefied
Ad Free Member
Joined
Mar 30, 2003
Posts
25,159
Location
Ontario County
 




Top