Separate names with a comma.
Discussion in 'The Stomp Box' started by Twangbanger, Aug 23, 2006.
Love both boards! Why not have a BOSS Tremelo on your small board?
Thanks. I wanted something different for the Trem that was cheap and cheerful. You might notice that the only pedal that's the same on both boards is the DD-3, but that's only because I'm a massive fan of it.
Massive fan of the DD3 myself, and BOSS pedals.
Recently finished putting this together. It’s got a whole lotta dirt, but it’s whole lotta fun. I can enjoy high gain without enraging my neighbors. This is running into a Blues Jr. III with a Jensen P12Q.
Polytune 3 > Compressor+ > Warbler harmonic tremolo > Pickle Vibe > Bonetender > Prince of Tone > Shoe 314 Ram’s Head Muff > OCD clone > Rockaway Archer > El Capistan > optical tremolo > 30msec Double Tracker
The board for last night's tribute gig. This has most everything i need for my own band except a fuzz.
The keeley dynatrem (white) was used for a subtle reverb although it has some awesome tremolo sounds too. The bottom left is an amp footswitch. It controls amp reverb and amp tremolo (DRRI) . We covered "Back to Black" the Amy Winehouse record, so i had amp reverb on 8.
The Wampler ego mini is new. I really like it...
A buddy turned me on to the Emerson EM Drive. I'm digging it so far.
I was using a Fulltone FD2 or an FD1 in CC mode. Also played a bit with a simple boost pedal just to give my rhythm playing a lift and slightly drive my amp (or Liverpool when I go direct). However, I really like the boost and option of slight grit the EM Drive gives me. I'm going to test it out in a band context very soon.
And the Keeley Phase 24 is relatively new to me. I like the versatility of going between 2 stage and 4 stage phasing. The 2 stage fast phasing is awesome for faux Leslie/Univibe/Phase 45 type stuff.
I just finished this one; had my left over Dano pedals, my TRex Yellow Drive and my new Ammoon Pockmon. Basically 5 drives, 2 echoes and 3 mod effects.
This is my current set up. I have the board mounted on a wagon to move it around and bring the height up to sitting level. I am mobility impaired.
Boss NS-2, Cot 50, Gain Changer, Direct Drive, OCD (boost), Rat, Fat Sandwich (low gain saturation), Red Llama (crunch), Barbershop V2 (end boost), Diamond Compressor, Tuna Melt, Diamond Counterpoint delay, Boss RV-3 delay/reverb, Boss TU-2 into Fender PA 100 and Avatar 2x12 cab.
This combination gives me clean drives that are stackable in various combinations that cut well with a drummer, guitar and bass. YMMV.
Found my new love for fet driver - it does what I want from dirt and does it spectacularly well. Lost TS mini, since all it did was putting blanket on my tone, especially when stacked with other drive, but would love me some good boost. And still feel like this board is too big CB classic>Phase 90>Fet driver>Tu-3>Reptile2.
The Blue Light Special:
Joe Gagan "Italia" wah with Foxrox buffer installed, Foxrox CC2 Hybrid fuzz, Fulltone OCD Version 2, Foxrox Octron 2, Dr. Scientist Reverberator and a Keeley Caverns 2. Voodoo Lab Pedal Power 2 Plus.
Guess I'm a huge fan of the second versions of things.
I have tremendous versatility with my board. I've only kept what I use regularly.
The plywood with carpet thing is getting a little old but I don't wanna shell out for a pedal train. It would be nice though. I've got one more plug free on my power supply. I almost got a tuner but it's more fun having my bass player tell me to get a tuner every time we practice
Updated my Bosch Case a bit.
Joyo JT-305 tuner which is a pitchblack actually but way cheaper.
Joyo Ultimate Drive
Joyo Sweet Baby
Mosky Golden Horse
Joyo/Harley Benton American Sound
Joyo/Harley Benton Tremolo
Boss DD-2 Delay
Caline CP-06 battery power underneath the board.
Sort of transitional phase....still waiting for the T-Rex Octavius.
Once I got the Octavius, it's probably good-bye for T-Rex Tonebug Booster, as the Octavius has a separate booster - I don't use highgain-sounds, therefore a booster in front of amp and overdrive still gives a volume boost and not only mor compression.
Signal: guitar (Ibanez Artcor AF75) in AKG WMS40, then T-Rex Gull Wah, Fulltone OCD, then to amp (Hughes & Kettner Edition Tube 25th).
Effect send into Rocktron Hush, then Tonebug Booster, Red Panda Raster, the El Cap and the FLint, back to effects return.
Cabling goes via SOMO-Pedals Patchbox. Power comes from my new Harley Benton PowerPlant ISO-2 Pro. I still have power connectors on the board, but I usually have tablet and some gimmicks for the microstand to feed. So far I'm pretty amazed by the ISO-2.
Thanks man. Blues and Jazz oriented stuff. A big mixture really. Here’s my youtube channel.
My pedal board:
Dunlop Jerry Cantrell Crybaby Wah
Polytune 2 Tuner
JHS Prestige Clean Boost
Ibanez TS9 TS808 Mod
Earthquaker Devices Hoof Fuzz
MXR Script Phase 90
Boss BF-2 Flanger
MXR Analog Chorus
Boss Analog Delay DM-2W
I also have a Digitech Soloman XT Looper not pictured. I don’t keep it on the board
D01A3885-9CFB-448B-94ED-C83D99409F81 by Hudman_1 posted Sep 2, 2018 at 5:06 PM
Took a picture of my pedal setup at the gig tonight.
You need to ziptie the cables and also move that red footswitch... sloppy work man...
I’d put them in the other order.
Is that a custom-built board?