Show us your Pedal board.

Discussion in 'The Stomp Box' started by Twangbanger, Aug 23, 2006.

  1. MatthewDickin

    MatthewDickin Tele-Afflicted

    Posts:
    1,410
    Joined:
    Jan 18, 2012
    Location:
    Bishop's Stortford, UK
    Just about managed to squeeze a fourth onto my Pedaltrain Nano. The Amp 11 is pretty much always on, set to very low gain, just to give a hint of hair to my Dr Z - I use the boost side set at noon to push it just a bit harder. The MXR is set for a thicker overdrive rather than a distortion. The Soul Bender is set really dark, and usually used with the Amp 11, so it doesn't get too fizzy. Lastly is a Moollon Tremolo, which is just a great, great pedal.
     

    Attached Files:

  2. doinsjames

    doinsjames TDPRI Member

    Posts:
    11
    Joined:
    Mar 9, 2011
    Location:
    Vallejo, CA
    This is the, we'll call it, "evolution" of my pedalboard; from the Danelectro Classic Pedalboard, to the Pedalboard I have today. I love Danelectro pedals...obviously, and this my current setup covers everything I need, and then some :D

    The FabTone is ridiculously insane, but it covers more than one could imagine, when you adjust the volume on your guitar. The Cool Cat Fuzz was a pleasant surprise, indeed...it makes your amp sound way huge :twisted:

    The ChiliDog Octave is also very cool...Daddy Hojo inspired me to get the pedal...I had forgotten about an octave pedal, until Daddy Hojo chimed in :lol:

    Thanks for making me buy another pedal, Daddy Hojo (JOKE) :lol:
     

    Attached Files:

    Last edited: Jan 16, 2013
  3. udister

    udister Tele-Meister

    Posts:
    376
    Joined:
    Dec 11, 2008
    Location:
    :noitacoL
    Mine:

    [​IMG]
     
  4. Johnnyb4894

    Johnnyb4894 Tele-Meister

    Posts:
    136
    Joined:
    Nov 24, 2012
    Location:
    Wesley Chapel Fl.
    Johnny B's Pedal Board!!

    Here is My Board,It has everything I needfor My Band Ultra-Cool!!

    Dunlop Wah
    Metal Muff OD/Boost (Love This Pedal ,I dialed it in and got a nice Overdriven Sound)
    Behringer Delay (Cheap But It Works-When It goes out I will get a Boss..)
    Behringer Tuner(Having probems with this pedal-going to replace with a Fender Tuner)
    Dan Electro Physco-Flange (All The Gravy I need and More-LOL)

    P.board (Small).jpg
     
  5. Coldacre

    Coldacre Tele-Meister

    Posts:
    339
    Joined:
    Jan 5, 2009
    Location:
    Nabootique
    [​IMG]
     
  6. pokett

    pokett TDPRI Member

    Posts:
    42
    Joined:
    Jan 26, 2012
    Location:
    Elk Grove
    Looks nice, do you mind my asking why you've left your volume pedal off the board itself? Is it just a space issue (from the photo it looks like it **might** be able to squeeze on) or is there a tonal/process reason? Just curious :)
     
  7. pokett

    pokett TDPRI Member

    Posts:
    42
    Joined:
    Jan 26, 2012
    Location:
    Elk Grove
    With the behringer dd-400 have you ever had any problems with odd clicks? Like the digital clock managing the delay leaking into audible sound? I was having that issue with mine, and just wondering if it was unique to me/my setup.
     
  8. pokett

    pokett TDPRI Member

    Posts:
    42
    Joined:
    Jan 26, 2012
    Location:
    Elk Grove
    It's a shame you don't really like delay... ;-)
     
  9. Six T. Six

    Six T. Six Tele-Meister

    Posts:
    199
    Joined:
    Nov 5, 2011
    Location:
    Long Island, NY
    Pedaltrain Jr. with a VLPP+ under the hood. Guitar into a Blackstone Appliances MOSFET Overdrive, BE Crystal Dagger, and Boss tuner into the front, then an MXR CC, Lovepedal Gen5 Echo, and Lovepedal Babyface Tremolo in the loop.

    The box that says "one" is for the amp channel switch.

    The box that says "Free Mustache Rides" holds picks, an outlet tester, mustache comb, and a slide.
     

    Attached Files:

  10. tele_pathic

    tele_pathic Friend of Leo's

    Age:
    48
    Posts:
    2,937
    Joined:
    Aug 18, 2009
    Location:
    St. George, UT
    Finally got my full "studio" set up. My pedalboard is at the bottom. It's the somewhat set for the near/foreseeable future.

    Since the weekend, I added a Dunlop tremolo. I had one years ago and of all my pedals it was the one I most regretted selling so I had to replace it.
    I also added a Pork Loin in over the weekend. HOLY SCHNITE! This thing is as good as everyone says.

    updated this pic.

    [​IMG]

    [​IMG]

    And here's the whole "studio" setup.

    [​IMG]
     
    Last edited: Jan 17, 2013
  11. udister

    udister Tele-Meister

    Posts:
    376
    Joined:
    Dec 11, 2008
    Location:
    :noitacoL
    Not a space issue, actually. the Pedal Train board is tall and puts the VP in a strange, uncomfortable angle.
     
  12. Coldacre

    Coldacre Tele-Meister

    Posts:
    339
    Joined:
    Jan 5, 2009
    Location:
    Nabootique
    [​IMG]
     
  13. tape

    tape Tele-Meister

    Posts:
    258
    Joined:
    Dec 25, 2010
    Location:
    Boston, MA
    My absolute favorite non-delay pedal that I've ever heard.
     
  14. pokett

    pokett TDPRI Member

    Posts:
    42
    Joined:
    Jan 26, 2012
    Location:
    Elk Grove
    AAAHHH, well that makes sense.
     
  15. Johnnyb4894

    Johnnyb4894 Tele-Meister

    Posts:
    136
    Joined:
    Nov 24, 2012
    Location:
    Wesley Chapel Fl.
    I haven't had any problems with the Behrringer Delay ,however I kind of keep it set to one mode.I don't have it set to a ton of delay.I keep it more Johnny Cash rather than the Edge.When I start having problems with this one I plan to get a Boss probably DD5.
     
  16. teleup

    teleup Tele-Holic

    Age:
    58
    Posts:
    994
    Joined:
    Apr 22, 2010
    Location:
    between Milwaukee and Chicago
    I have 2 boards, this one stays in the studio and not on the stage
     
  17. jaded_musician

    jaded_musician TDPRI Member

    Posts:
    12
    Joined:
    Dec 8, 2011
    Location:
    Tracy, Ca
    Putting together a new PedalTrain 1 board

    Mockup of my new pedalboard. I'm waiting on my Fulltone Deja Vibe and Throbak Overdrive Boost before I wire it all up.

    [​IMG]

    Fender American Deluxe Power Telecaster -> Pedalboard(Dirt in front of amp, delays in the loop) -> Mesa Lonestar 100/50/15 with 2x12 cabinet.
     
  18. andrewsadlon

    andrewsadlon Tele-Meister

    Posts:
    490
    Joined:
    Jun 17, 2012
    Location:
    DeLand, Florida
    Nice set up.
     
  19. jaded_musician

    jaded_musician TDPRI Member

    Posts:
    12
    Joined:
    Dec 8, 2011
    Location:
    Tracy, Ca
    Thanks, a never ending work in progress. I keep the Xotic EP Booster and SP Compressor always on. I'm going to see if I can find enough space to mount it under the board next to the Voodoo Labs PedalPower II+. I'm going to wire up some connectors into the pedalboard for amp in/out and effects loop using these connectors from Redco

    [​IMG]
     
  20. kermit

    kermit TDPRI Member

    Posts:
    52
    Joined:
    Nov 20, 2009
    Location:
    Genoa, Italy
    Two delays?

    Why do you put two delay pedals on the board?
    In the future I'd like to buy a delay and the "Flashback" and the "Carbon Copy" are alternative in my ideal pedalboard. Just to ask.
     
IMPORTANT: Treat everyone here with respect, no matter how difficult!
No sex, drug, political, religion or hate discussion permitted here.


  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.