Dave DiLapo

NEW MEMBER!
Joined
Aug 17, 2022
Posts
1
Location
NJ
Hoping someone can help me find the flaw in my logic here,

I am trying to wire up a Seymour Duncan JB Bridge pickup with a DP3T ON/ON/ON slide switch so that the first position will give me both coils in series, the second position will give me no output from the pickup at all, and the third position would give me just the north coil. However, I am still getting signal coming from the pickup in the middle position (it seems like from the north coil). It's very faint, but when I have my guitar running through a fuzz pedal, I can still hear signal pretty loud. I have tried swapping out for another switch, as well as swapping out a different pickup with the same outcome. Im stumped, I've been working on this for a couple days and I would love some feedback on what I may be doing wrong here.

I'm open to series/off/parallel wiring as well, although I had the same problem with my pickup wired that way as well.
Screen Shot 2022-08-18 at 6.39.35 PM.png
 




Top