Mini Pedal holders?

[JuneauMike]

Anyone found a cheap and slick way to hold mini pedals to a board without them moving around a lot? Velcro doesn't really do the trick since when you step on a mini pedal it wants to flip on its side. I looked into these things but their per unit cost is too high:

Seems like there ought to be a slick way to do this cheaply. Definitely a FWP, but still. Anyone got a cool way to accomplish this?

 

[ndcaster]

I haven't done it, but mini pedals are between 1.4 and 2 inches wide, so why not get yourself some extra large binder clips like this

https://tinyurl.com/4fak6v5p

screw them to a board in a row, get creative with drilling, etc.

 

[JuneauMike]

I haven't done it, but mini pedals are between 1.4 and 2 inches wide, so why not get yourself some extra large binder clips like this

https://tinyurl.com/4fak6v5p

screw them to a board in a row, get creative with drilling, etc.

Hmm. Blocked at work from opening the link. Got another one?

 

[ndcaster]

total kludge, but maybe there's a way to make it work

"crate clips" is another search term, but I haven't found something suitable there

good luck!

 

[bullfrogblues]

I drilled holes in the pedalboard and used cable ties. the pedals don't move at all.

 

[radiocaster]

Tom''s Line/Aroma pedal case. You can also cut the foam to fit a slightly bigger pedal or two.

There were some Mooer ones as well, but are no longer being made.

 

[igor5]

3M Dual Lock Tap have been enough to me.