LP Junior Geometry - mortise/ tenon question

Slowtwitch

Tele-Holic
Joined
Dec 30, 2018
Posts
627
Location
South Africa
Just some feedback....
I'm glad with how things turned out, esp since this is my first set neck/ mortise tenon construction build.

I ended on a 1.65 deg angle on the neck tenon, mortise level, for now, and you can see I can still go down 1mm for the fretboard to be flush with the body on the 16th and the bridge to sit flush on the body, I might do that, but only after the fretboard is done.

Doing those right angle steps on the sides to the tenon which is not full width is a royal pain!!!

IMG_20220616_134630.jpg IMG_20220622_174826.jpg IMG_20220623_090554.jpg IMG_20220623_093223.jpg IMG_20220623_094137.jpg
 




Top