Looking for MXR Sustain pedal shematic and layout if possible.

[jimbo735]

Anyone have suggestions on were to get a schematic for an old MXR Sustain pedal M-163 commande series.
Dunlap does not have it nor give out to public any schematics and according to them it was before they owed the company.
I would like to rebuild the PC Board with a better board the board that's in this unit is falling apart the trace is coming away from the board and if I try soldering it peels up even easier.Im done running jumper wire.
If I have to build a new board that's fine to, just thought I could get the schematic and layout and trace somewhere.
Thanks!
Jim

 

[jimbo735]

I coundnt have stumped you guys, no way.

 

[xmugmugmugx]

http://w.freestompboxes.org/viewtopic.php?f=1&t=12177

You have to be a member to see the images, but this thread may have what you're looking for.

 

[Montana_Dawg]

Try here: http://www.musicparts.com/products.asp?Company=MXR

 

[RyanJH]

Try here: http://www.musicparts.com/products.asp?Company=MXR

Yup it's about 2/3 of the way down the page for $15.

-Ryan

 

[Armo]

Jimbo - Have emailed you the schematic from freestopboxes as importing it here makes it illegible.

 

[jimbo735]

You guys are the best,I always have good luck on this forum Thank you very much.

Jimbo.

 

[Baddog01]

I'm looking for a schematic for an MXR 163 Sustain pedal. Anyone have a copy they might want to throw my way ?
Will be happy to pay it forward in the future.

Thanks
Keith

 

[Armo]

There you go.

Here's the thread it came from.

http://freestompboxes.org/viewtopic.php?f=1&t=12177&hilit=mxr+sustain&start=20

 

[George Martini]

View attachment 456075
There you go.

Here's the thread it came from.

http://freestompboxes.org/viewtopic.php?f=1&t=12177&hilit=mxr+sustain&start=20

Thanks