I need some wiring help, please.

[bullfrogblues]

Could one of you fine gents help me with this diagram?
It's for 2 P90s, 1 volume, and a 3 way toggle. No tone controls.
Thank you.

 

[guitarbuilder]

Hot and Ground from the p90's would be in the same place as the hot and ground on the two humbuckers.

2 Humbuckers/3-Way Toggle Switch/1 Volume (guitarelectronics.com)


1 Humbucker/1 Single Coil/3-Way Toggle Switch/1 Volume/00 - GuitarElectronics.com

 

[bullfrogblues]

thank you, Marty!
I do appreciate it!
I tried the Seymour Duncan wiring site and I couldn't configure what I wanted.

 

[schmee]

Just the SD layout with the Tones eliminated, sub the 2 wire P90's in there.:

 

[bullfrogblues]

Thank you @schmee!

 

[Steve Holt]

You said P90s right?

Sorry for the bad drawing. I drew it up on my computer at work. It's the same as the others, but with P90s instead of having to decipher all that humbucker wire.

 

[bullfrogblues]

thank you, @Steve Holt ! I appreciate it!
perfect!

 

[bullfrogblues]

@R. Stratenstein
Hey Rick! long time, hope all is well!

 

[R. Stratenstein]

@R. Stratenstein
Hey Rick! long time, hope all is well!

Hey, Froggy! Doin well, thanks, hope it’s the same for you and yours.
Are ya building something with the 2 P90’s, or fixing something, etc?.

 

[bullfrogblues]

Hey, Froggy! Doin well, thanks, hope it’s the same for you and yours.
Are ya building something with the 2 P90’s, or fixing something, etc?.

Sorry for the late reply. We've been out of town having early Christmas with our family that can't be here for the holiday.

Definitely have plans, 2 guitars with the 1790s pine and will be modeled after LP Double cut specials. We have all the parts now, just need to find the time to drag out the wood, mill it and make some body slabs.

We're doing as well as we can for what it's worth!!
Cheers, my Friend!

 

[R. Stratenstein]

Sorry for the late reply. We've been out of town having early Christmas with our family that can't be here for the holiday.

Definitely have plans, 2 guitars with the 1790s pine and will be modeled after LP Double cut specials. We have all the parts now, just need to find the time to drag out the wood, mill it and make some body slabs.

We're doing as well as we can for what it's worth!!
Cheers, my Friend!

Cool. Hope to see them posted.

 

[bullfrogblues]

I certainly will. My friend with the lumber is also in the process of designing a new house, so that's taking up a lot of his time.