TDPRI members I would like to introduce my B-caster set, this is my take on the original ’50s Broadcaster pickups. For the bridge I use 43 AWG Plain enamel wire with alnico 3 magnets to produce an 8.85k pickup. The coil is slightly more condensed with this wire producing a slimmer coil. The result is a tight bottom end and a nicely rounded top end that is not too bright. I use a zinc plated baseplate just like the originals. The neck is a 7.65k alnico 3 pickup wound with the same 43 AWG Plain enamel with warmth and a little sparkle. Forum member @rokfnrol was kind enough to cut some sizzling clips of them For more info and to purchase please view here, http://www.leddinvintageguitars.com...-telecaster-pickup-set-vintage-50s-brightness Thanks for looking, Dave.