Separate names with a comma.
Discussion in 'Tele Home Depot' started by Captain Nutslot, Jul 24, 2016.
2/3rds of the way there! Sounds great so far.
U sound great!
What are the color codes on them leads again?
I must multimeter
One pup is black start and white end. The other is green start red end. Connecting the red and white gives you a series humbucker.
Nice, Cappie. u had me @ the first pinch harmonic. I think the problem with the quiet coil is that you don't have too much reverb. Rob always has too much reverb, and he doesn't seem to have that problem. Very nice sounding guitar, looks fun to play.
I haven't been able to dig up an alternate wiring diagram for a dpdt on on on switch to get a good 3 tone split on a humbucker.
The unique construction of Robs pickup is why I want this wired like this.. One coil on/both coils on/other coil on.
Any education would be met with bear hugs
This would be a good one but not what I want right now.
So... Here's one way... This diagram shows the switching action of an On-On-On toggle switch (which can be confusing!):
This will give you either coil separately, or both coils in parallel... but not both coils in series.
Note the jumper wire between the two middle terminals on the switch!
Thanks Jim, I'll try that out tomorrow and report back
We need the coils in series as well Jim. Something like a Tele 4 way switch is needed here.
Can you tilt that HB so the black coil is a bit closer to the strings?
Dam that thing rocks!
explain... but then were back in to making sawdust... im cool with that
thanks! but that aint gonna do the trick... that particular coil is the 'big one'! it should crank.
I still have a 2 way dpdt switch on hand... if I add that to the mix, maybe i can get this thing rollin full force. whatcha say? whatcha think?
Cool dude. Dissonant chordage= slightly unsettling. Your kid is awesome.
Ha! Thanks man, he rocks, and loves making videos on his own too... He thinks he's pro.
What the hell! Lol found this... Can I make it work with the switch I just paid $12 for?
Twelve bucks? What's it made out of, unicorn spleens?
Ya really, at least the All Parts packaging was.
Ok... I'm gonna try something.
This link might have cleared a thing or two up for me.
Why is this such a pain in the balls
Wiring always does my head in, but I would think that you COULD wire that unicorn switch up to do what you want; it's OVER-qualified...
I know it, now using one row of terminals , wired like the spdt diagram above, I am getting (one coil/ one coil/the other coil
I can't get the abstract bastard to just work in series!