jensen

Quick Comparison of Jensen C12K vs. an Eminence Alessandro GASC64 Speakers in a Fender Deluxe Reverb This is kind of a Part II to my post titled, "Quick Comparison of Jensen C12K vs. Jensen N12K Speakers in a Fender Deluxe Reverb."...

I had a Jensen speaker sitting around that I pulled out of a Princeton Reverb, and decided to build a small cab with it to use with a Fender Ultralight Jazzmaster that I had sitting in the closet. It turned out pretty great and I'm now thinking about a second one for a simple stereo rig...

Hey all, Some of you may have seen my other threads where I roll through a bunch of speakers and give you “my” opinions. I would like to try an older Jensen Ceramic, something that I have never tried surprisingly. The amp will be my 69 Deluxe Reverb and 62 Deluxe. My first concern is, is...

Trying to load a 1x12 to get some black panel tone. Seems like these are the two most well liked and common 12" from those years (decide against JBL for now). Wondering if anyone has good description of the difference or a good shoot out of two vintage examples? Also, I was curious which modern...

Using my home built Telecaster with Allparts neck, Joe Barden lead and Seymour neck pickup. Amp uses all new tubes, 5U4 rectifier, 12AY7 preamp tube, 6L6 outputs into a Vibrolux Reverb tranny with a beefier Weber power tranny Speaker is a new stock Jensen P12Q No pedal effects, and amp set to...

I finally took some time to make a sound demo of the first amp I built. This is the one that started me down this amp building rabbit hole. I don't play through this amp often, but when I do it always surprises me how good the Jensen 10" C10Q sounds!

Hi, This is my jensen tornado that I was planning to use but I noticed this. Does it effect tone or is it normal?

hey yall, i have a question on a speaker. i have a 1962 Maestro M-2RVT, and it came with the original jensen C15R. it has always sounded lacking to me, but the volume level is nice. a bit ago, i put a Emi legend 1518 and loved it. however, its LOUD. do you guys have any recommendations for a 15...

When I bought my '75 Princeton (non-reverb), it came with an older Jensen 10". Date code is pretty worn, but looks to be '69, probably from a Silvertone, so obviously there's no mythical "numbers-matching" cachet to this particular speaker in this amp. It's a C10Q. It has an older-looking recone...

Hi all, I've been modifying my Champion 600 (converted it to 5F1 a while back) and have been considering replacing the speaker for a vintage one. I recently came across a 6" Alnico Jensen P6-W Concert speaker for sale but can't find a lot of info about them online. Just wondered if anyone...

Picked up a ‘57 Custom Champ a couple weeks ago and couldn’t be happier with this thing. Sounds great fresh out of the box, but I wanted to make a few tasteful changes. Relocated the power cable strap/clamp to a position that makes more sense (the stock position puts the power cable right up...

I put these into a tweed Bassman. Excellent little speaker. The highs aren’t as harsh and the bass is much tighter than the stock Jensen P10R. Just a much smoother, more pleasant sound, over all, and handles OD pedals better, IMO. They aren’t completely broken in yet, but I’m very impressed...

I just picked up a '72 Traynor YGM-3 Guitar Mate Reverb. It's exactly what I was looking for in wattage, size, etc. but it has an old Utah speaker in it that I'm not liking much. It sounds stiff and muddy with this big round midrange hump that I can't dial out. I love everything else about the...

Hiya. Does anyone know why some old 50s Jensen’s have raised bumps around the speaker basket (and extra holes) near where it meets the bell? Were these for mounting transformers to? Does it mean they aren’t speakers from a guitar amp and came from an organ or something like that? This is a p15...

Hello, im currently starting a build on my first tweed amp (2x10 5E6A Bassman) and i have these Jensen P10PF's that im thinking about getting Re coned and dropping in the bassman. Anyone here ever had experience with these? The magnets on these things are HUGE, also whats the best place to get...

I just released this new video about speakers found in vintage fender amplifiers. Also, I tested a couple of current Jensen reissues in my old Twin. I hope you enjoy! The Original Equipment Manufacturer or OEM speakers found in vintage Fender amplifiers over the years were essentially made by...

Hi everyone, this is my first post so hopefully this info request is in the appropriate thread. A few years back I found a funky speaker cab at the local Goodwill for $5 and took a chance. Luckily this blue beauty was inside. Using Google as my friend, I've come up with nothing related to the...

Dear fellas! So I've decided to replace my stock Oxford speakers in my VVRI. These are the speakers I've came across and I need you to help me decide. As for online video reviews, everything sounds so similiar. Jensens: P10R, C10R, C10Q Eminence: Legend 1058, Ragin Cajun If anyone can...

Not really looking for a lot of different speaker recommendations. Just curious if anyone has tried the 12F150 in the Blues Jr. How did it sound, especially compared to the reissue Jensen C12N that’s stock in the NOS tweed. Thanks!

Anyone have experience with all three of these speakers and able to share notes? Thanks!

OK, I've honestly not been at the sauce from early this morning but, anyone got any info. on this? http://tokai-guitars.co.uk/product/tokai-amplifier/ So, the Tokai UK website url is bona fide but is known to be experiencing 'lawsuit' issues again. And, some other pages seem to be 12 months+...

Hopefully someone can help me with this because I've officially looked everywhere. Many years ago I garbage picked a Hammond S4 chord organ and it's still hanging around. Recently I decided to tinker and pulled many awesome preamp tubes from it. Mostly GE and a few RCA 12au7's. Then I wanted to...

Hello everybody, my name is Matteo Baratella, I am from Italy, I am trying to build my first guitar cabinet for the Marshall AVT150H pre-amp head. (150 watt output - impendence 4/8 ohm). My cabinet... IMG-20171001-WA0018 by Matteo Baratella posted Oct 14, 2017 at 2:04 PM IMG_20171001_170016 by...

Looking at speaker options for a US made Red Stripe Peavey Envoy, which comes with a 6 ohm Blue Marvel. The amp is 40 watts, solid state. After inquiring with Peavey about ohm requirements, I received the following response, which I thought others might find useful as well: You can consider a 6...

I didn't get any joy when I posted this over in Amp Tech so... Who can help me out? Weber and WGS recommendations aren't much good to me as they're too expensive over here. Eminence ones are cheaper but they have weird glued cones on some of them? Not a fan. Jensens are a good price but I...