Separate names with a comma.
I picked one up today
It’s everything I’ve always wanted in a fuzz pedal...
I’m stunned at how good it is.
The soft V always felt like a “D” shape form the nut to 4th fret then the v would bribing it’s prominence until the 12th fret ...
I’ve only played...
I have NTE153
Which sound pretty clear in another unit I built.
Will they sound ok?
They seem to allow slot of twang through.... I likey the twangy
Try that Soft fat V out...
THAT is a classic and just evokes things for me.
In my experience with this pedal, it seems to crap out or flub out if you attack the strings too hard. It almost seems to lack compression...
I’ve never heard of the did pedal you’re mentioning.
For just boosting or “MORE” of your natural signal, it’s hard to beat this pedal.
Yeah a chris is truly amazing such a showman and solid player, elite.
I use the Ibanez BB9 through an old DigiTech delay into a bassman 10 amp....
[ATTACH] I purchased one about 4 years ago. Put it away. Forgot about it.
After a solid week of trying out overdrives and boost pedals for a...
Try one repeat with a touch of reverb
Set the repeat volume just as high as the origin note.then back off from there. It’s more of a feel than an...
Oh, I almost forgot to mention that I've also converted this to a bolt on neck ala the old Taylor 2 bolt design.
After tirelessly searching the web for how to make faux tortoise shell pickguard material, I've moved on to, Mylar. Plexi glass could be...
To get the vintage tobacco burst
1) dye the unsealed body yellow. Until it's almost lemon yellow. Seal it up, sand it flat.
Shoot the burst...
If you're using poplar and want to do a translucent color ie a sunburst.
You should dye it yellow, cause poplar is basically light green and...
Dimension is 35x6 I think.
About a day. Sand between every coat, keep it really thin.
Sealer is deft
Lacquer is deft
Yellow is transtint...
Well, the process was this.
1) glue 2 pieces of1x10 poplar together.
2) rip to overall width.
3) rough out headstock shape on...
So I had some stuff lying around in the shop and I needed a lap steel.[IMG][/URL][/IMG]