Separate names with a comma.
Try pulling the diodes out and wire your rectifier as spec with your HT on pins 4 & 6. Are the results the same then?
I built a 6G3 without Tremolo, and cathode bias instead of fixed. It was lovely.
With a pair of 6V6's, a 5Y3 rectifier, and cathode biased somewhere @ 330R (or a touch lower) you should get about 366V on your OT CT, depending...
I'd try a 330R or a 360R, common sizes to obtain. Replacing the 470R with a 1K will probably be of no effect.
V2 pin 1 is not internally connected on a 6V6 (note not all octals are the same). Some even use that empty pin on a 6V6 as a connection point for...
I was in McCordsville, just east of Indianapolis.
The cathode bias will pull your B+ down to a useable range with the original PT. Also adjusting the bias value of the cathode bias will change the...
The doublecut LP Pro
The 10watt 6AQ5 Tribute amp, dedicated to Dudley Craven one of the Fathers of Marshall amplification, (dedication requested by Ken Underwood ,...
The 2017 Deluxe Ash Telecaster that I got two days ago.
My 36watt RS 6V6 model. The RS was after my Dad, RIP.
Thanks all !
Hi all, We moved to Estero, Florida this fall from Indianapolis, In. Retired. Former Owner / builder of GR amplifiers (business closed in 2017)....