Separate names with a comma.
Build your own
Different levels of cost and amount of work needed.
Try Aircraft Spruce. They have many different types of thin plywood. Also they sell in partial sheets.
If in doubt what to make, both. you know you want to.
How could you tell?
The quick adjust is it's nicest feature.
You're going to love that sander. I made a jig to cut bulk sandpaper to keep costs down. Here's what I have bought in various grits....
Already have the shop warming gift.
Will there be shop tours?
I would be interested in the archtop bridge
Lee Valley has a better price
https://www.leevalley.com/en-ca/shop/hardware/fasteners/washers/47230-lee-valley-countersunk-washers Link is in...
If you don't mind a road trip we could do it here. I have a 16/32 sander
Think Jeff Healey
There are 2 sites for build your own that I know of . The first is https://www.joescnc.com/ and the second is http://www.mechmate.com/
I always thought it was the suction created by well matching surfaces.
You could always use 3 dots.
Eastwood has pin striping supplies
I have the Delta and just planned a 40 by 13 inch blank from 1 7/8 to 1 3/4 and it worked fine.
Would you be able to cut the pattern in the guitar and inlay with contrasting woods. then cut the top curves after inlaying.
Check out Bill Pentz's page for dust collection info
What about Grizzly G0704 or Precision Mathews PM-25mv. Small footprint and can be converted to cnc. Check out Hoss2006 on CNCzone.
Cncrouterparts has a series on designing a guitar in Fusion
Also Andy who posts here has a Fusion guitar as well
Are you sure your nephew wouldn't play the guitar right handed? Lefties often play right handed. I play guitar badly right handed , shoot right in...
Check the debounce setting in Mach3. You can increase it to 2000 to test . It eliminates noisy limit switches. Also check your switches and...
There are several carved top 3d models on Grabcad that you could import into Rhino. Several neck files to.
I'll give them a look