Separate names with a comma.
I'd put my Tele partscaster up against any other Tele.
Pine body, nitro finish, Keystone pickups, Glendale bridge and compensated saddles....
I have both and the 2 point does stay in tune better.
As for tone, I don't see any difference.
I would use a black stain to cover the entire body, then sand it down so the only remaining stain is in the grain cracks. I know, this will make...
Had great luck with Warmoth necks.
I bought 2 (boatneck maple and a canary) neck and both didn't require any work.
The frets were fine as...
I have a Jetstream 360 MIK. It is an outstanding 3 pickup guitar.
The 3 were P90s. I bought a 70s Bill Lawrence mini-humbucker and stuck that...
It was easy to do.
I scuffed it up with steel wool.
Used a rag and spread vintage amber stain on it where I thought it should be.
The RIs are solid guitars.
I bought a 2010 reissue and love the 12'' neck and frets. The trem is reasonably stable.
I wasn't too put off by...
Here it is finished. All nitro and she sounds as great as before...
I've got Toneriders in my strat.
Great sounding pickups..
I'd get a two pivot trem.
Wilkinson trems have been fine for me.
I refinished my Tele with white nitro primer, nitro surf green, and nitro clear coats.
Why you ask?
Ah, I, uh, I'm not sure....
I own 2 Revs. A 360 Jetstream (which I love) and a Manta Ray that I've never bonded with.
They are sweet guitars. Never heard or read anything...
There ya' go!
Don't we all?
That's a reasonable solution. The only modifications would be a new pickguard and maybe a 500 pot.
Black dye thinned some applied with a soft cloth on bare wood is the trick.
Let it soak in and dry. If not dark enough, reapply.
I followed the common advice and waited until the new ferrules arrived.
I never have found the old ones....yet.
I used this on my repainted surf green tele and the result was very good.
I am not worried about the silicone residue. I'm never going to...
We with WRHB reissues are very fortunate.
I don't think you can go wrong with Telenator, Creamery, or Novak.
One big advantage with...
All of the above mentioned have great high quality necks.
I happened to use Warmoth for my 'boatneck' Tele build.
I stained and finished it...
That is a great story.
I had Telenator do my WRHBs. I had the Mod1 done. It is very reasonably priced and they sound so much better. The...
Great video and it worked for me also.
I love both my Strat and Tele.
To me, what makes them great is that they DON'T sound the same.
@Buffalo- I'll try the method you described.
@Twick- You are exactly right. I took them off last and undoubtedly put them somewhere safe so I...