Separate names with a comma.
Did you ever solve this problem? The reason I ask is because it came up in my 65 Princeton Reverb build. I placed a grid stopper on the 12at7...
I am just going to flip it. My wife would kill me if I tried to use a 55 watt tube head in the house. I got the whole lot (50 appliances) for...
You guys were right it was european spec. And you caught it quick too. I already replaced the transformer with one I had lying around that fit...
I will check later on today, but its looking more and more like you guys are correct about the type of transformer. Thanks
If it's a 230-240 wouldn't that also effect the bias circuit? According to the schematic it's designed to put out 20 vac and that part at least...
I pulled the transformer from the circuit before the measurements and just hooked up my voltmeter to the loose leads.
I think This is the best approach but I don't have another transformer with a bias tap.
The transformer was disconnected from the board when I took the measurements. The tubes did not glow.
Hello all, I recently purchased a Bugera V55 infinium in a lot of damaged appliances at a local returns outlet. Obviously it is in non working...
That first area is a some type of speaker selector. It indicates 1,2,3 and the wires run to the 2nd picture. The 2nd picture is for adding...
I get it. Like a slave unit or just the power section. It must have another portion that goes with it. Thanks for the info.
Sorry to bother anyone. I've gleaned tons of information from the forum but never posted or joined. But now of course like most humans I need...
