Separate names with a comma.
what all do you get for $46.90 after shipping? 12ay7 a couple resistors and a switch?
Remember those RS wall attenuators are 8ohm, I actually built one identical to yours and it works pretty well but there was a bit improvement but...
I'd get the gmajor personally
I ended up with a rocktron xpression that does the job for $150 on ebay
Check out the swollen pickle which is around the same price range as the tonewicker
(I'd get the tone wicker muff)
pics go a long way but really you'll kind of have to judge this for yourself. is there wire still in the hole?
there shouldn't be any problems...
only electronic mods?
mid/treble boost i guess
i don't even like tone controls on guitars though :o i'd rather use a pedal if something must...
i picked one up, learned a ton from the preamp book (and his posts)
Heyboer compared to which other transformers? Heyboers are usually really high quality and affordable
I don't think you'll really need a pedal...
I don't know if it's worth pointing out but I think with the standard 5e3 you can dedicate one of the channels for clean and the other for dirty...
I always thought it was kind of funny that taylor trained breedlove, then he started a company and sold it to his brother to go back working for...
well if you really want to get creative you can throw a pot in between the two 1m resistors
usually 1m+1m is close enough
You could just go to bestbuy/walmart or a car audio place and pickup a 12" speaker grill
It looks like a frame would have to be built. I have a couple cabinets where the grill cloth is attached to a frame and then velcro'd to the...
I say eyelets are easier
It depends on the turrets but a lot of them are a pita to solder
I'd suggest the ax84 or weber smokin joe if you think that you're able to read a schematic and layout only....
the p is the early 1987 split cathode plexi with ss rectification
They're based on the various circuits marshall used, although I don't know...
play around with the tubes if you want something a little cleaner, i think you can also do the input trick with reverb on them
Dorm room? Check out the line6 pod
get some sennheiser hd-280 pros and have at it
You can't just throw a tube in the chain to make something 'better'
I'd suggest a graphic eq
There isn't a HUGE difference between the tones other than the dual chains
The biggest benefit iirc is that the x3 comes with all of the amps...
I'd suggest a Peavey Vypyr over a line6
this is a troll thread right?
What about these two resistors right here, they should be connected to ground at that point
I usually take a pic of my boards...
Are those 220k grid resistors connected to ground?
the 18watt with a vvr or attenuator would probably sound better than the firefly
the firefly is pretty loud for 1 watt (into a 4x12), it...