Separate names with a comma.
Ok. Nothing special here but I wanted to share some troubleshooting that I had to do because I wasn't careful enough upon first wiring. Just...
Hello all and Happy New Year! I have a guy asking me about building a Princeton Reverb "clone" for him. I say "clone" because he isn't...
I am thinking about a future build idea and was wondering if any of ya'll might have some input. I am thinking about building a 6v6 powered...
Ok. I wanted to show some of the steps I use to build an amp from scratch. I know there are probably a hundred better ways but this may help...
First the observation. This is out of a 1960 Silvertone model 58 turntable/radio. The topside of this was covered with fuzzy mouse goo so I...
Mods, If not correct here please re-post as necessary but this group has ALOT of knowledge so I thought I'd try here. I'm helping a friend ID a...
Ok all! I'm getting ready to start a point to point wired 5F11 Tweed Vibrolux type amp. My question is does it matter which triode is used for...
I have been wanting to do this for a while and I'm finally done. This is my way of thanking this site and all the others that I've learned...
Hello there amp experts! I have a Sovtek MIG 60 head for repair for a friend that needs new power and standby switches. DPST, lighted, and the...
Hello all! Posted this in the Other Guitar forum and didn't get any hits so I'll put it here where I know there is a very diverse group in many...
Hello all! I was wondering if any one could help with identifying this guitar. [ATTACH] [ATTACH] Set neck, mahogany body, fancy fret markers,...
Hello there, I am looking for ideas on how to set up a "test pig" for circuit modifying. I was going to build a double row of terminal strips...
Hello all!! I asked a question about the pickup I just finished winding and I was asked if I was going to document the build. I felt for...
For the 2013 challenge build I made a two pickup guitar. I wound them reverse of each other but "somehow" got the reverse polarity of the magnets...
I'm in. I'm no expert but I really wanted to make my own pickups so I figured "why not!" Going to try an Alan Holdsworth style...
I just got some maple boards approx. 8 inches wide, all at least 5/4 un-planed. One is about 6 ft. long, 2 are about 7 ft. long, and one is 9 ft....
