Separate names with a comma.
Nfb loop is a must in these hot and noisy amps. Then consider putting a more efficient/ sensitive pair of speakers to get higher headroom.
I took out the jensen in mine and put in more sensitive Eminence ram rods. I've done about 10 gigs with them so far, so only just breaking them...
I have a vintage spec neck and the skinny frets are just about worn out is it possible to change it from the 7.25 to 9.5 radius, or just the...
Yes Wally blue. Thank you.
Sorry, they are Sovtek 5881 wxt
The tubes are modern sovtek and appear to be pulsing blue?
Tungsol 12ax7 are better than gt imo.
Custom vibrolux reverb
Is this normal on a cvr?
I had the same issue, I put a sheet of bubble wrap under the tank.
Wierd intermittent fault on power
My CVR occasionally will not power up. No red light, and no tubes glowing. I have noticed that by merely unscrewing the jewel bulb cover and...
Yep they are 5881 WXT
Not wanting to spend silly money so vintage and NOS glassware out of the question. I have Sovtek in the amp at the moment.
Tung Sol and EHX are made in the same factory and are extremely simular.
The moyer mods are more than just the the nfl. Check Internet they are well documented
If it's the same as mine, be prepared to have a noisy amp. I had the moyer mods done and it's now a great amp.
Don't waste your money on NOS tubes. Modern Russian I. E. Tungsol / EH will be as good as anything in that amp. Try a different speaker, probably...
Isn't that what the Chinese are getting for making the transformers etc in the reissues?
I'm in the uk by the way
Last word from me. I have 3 of the ge jan 12ax7wa and 1 of the ge jan 5751 and I would gladly swap for brand new tung sol.
My advice would be to get the cheapest jnr you can and get a bigger cabinet for it
Whether they are like the old ones or not, they are great amps. My Coronado is my number one rig. Quality amps, unlike modern fender amps.