Separate names with a comma.
The price on the Gibson ES 335 is mainly due to the logo on the headstock. I have visited both Heritage i Kalamazoo in the formerGibson premesis,...
Take a look at the guitar neck, the width is changing from narrow at the nut and widest at the last fret. Aiming along te edges the aiming lines...
The problem is the radius of your neck, it should have been cone shaped. Why it isn’t so have two reasons : 1) the luthiers don’t know 2) it is...
Many guitarplayers using capo position the capo in the middle of the fret, thus pulling the guitar out of tune. The capo must be as close to the...
Sounds as your neck is mislocated so correct intonation is not possible. Did you buy the guitar as a kit or did you make the body and just bought...
As the Gibson volume pots are voltage dividers the volume pots are not fully independant. You can realize it if you with both pickups in - toggle...
- or use a tuner to test the octave tone, if sharp, make strings longer, if low, shorten the strings. It is not rocket science - -
The flageolet on the octave point, 12th fret must equal the tone.
Did you try to adjust intonation ? It sounds mad the tuning pegs make a problem. To my experience a guitar is not finished from factory, on must...
As a very young boy I had aguitar and learned a few chords by looking at other guitar players. I lived in the country far from guitar teachers so...
Hi, I made a couple of guitars through my life, the first one was a bass similar to a Fender, but with 88 cm scale. My fretwire was a soft type...
There seems to me as the general term is "the harder the better" - this is not necessarily true. There is a fretwire named "Scandinavian self...
Hi. I had many years ago a Burns Bison bass with a "violin" style peghead with beech neck. Beech is reckognisable by its "spotted" character....
