Separate names with a comma.
Anybody want a Martin strat?
Careful with aftermarket case with Gibson guitars, if they are not deep enough they will break your headstock. Gibson’s have a very steep angle on...
I have the V55 combo the Chinese preamp tubes suck, replaced them with vintage Amperex. Sounds 100% better. The front end is a copy of the Peavy...
Why do push pull amps use 3 or 4 preamp stages while SE amps use only 2 ???
Practice rig 2017 Faded T and V55 bedroom practice amp [emoji41]
Frontman 25R heavily modified into headset
Looking at the schematic this amp uses 2 12AX7 stages for clean then adds 2 more for gain. Anyone have an opinion on voicing the clean as Fender...
Any way to use headphones with a tube amp with no jack?
I second the Eminence speaker, however I am really impressed with the volume increase the Ragin Cagin gave mine.
Listening to the amps side by side why would you want to do that to the V55, o_O
If you change the speaker for the ragin cagin it gets a lot louder
My 25R is modded with 5532 opamps Mod 8bb3cib reverb Ragin Cajin speaker the drive channel has been converted to "tube screamer" with LED's and...
Ok so I ran the preamp out to the line inputs of a 25R to head phones headphone problem solved. Now i plugged an open 1/4" jack into the power amp...
Can this work, can it damage anything??
Amp is a Bugera V55 Infinium
Put a 100pf cap across the 470 resistor in the drive channel and the frontman sounds great on drive channel.
Chesterfield County, south pf Richmond
A little video I made to help with opamp replacement.
hope it helps
Love My Johnson AXL Tele copy with EMG's.
The Kustom SS amps and pa's were much better then Fender SS stuff, A lot of pro's used them with good luck.
Wondering what your favorite neck radius is. I see necks from 12-7.5, Mine is a 12. I have played it for years don't know if I should try a new...
Here you go try this :
Adds reverb and 60 watt final amp.
Anybody tried to install a 12" speaker in the stock cabinet?
Title say's it all, what would be the optimum plate voltage to use on a 12AX7 used for a preamp section?