Separate names with a comma.
It doesn't look right, remove the pots and switch ,plug the holes and go for option three....:p:lol:
In twenty days you mean.:lol:
Haha c'mon open your cards! :D
The whole procedure took 25 minutes, just for the records....lol!
Option c for me,you know....
Rich I use a 12mm (is close to 1/2") round bit.
I made a quick video showing the duplicator and how it works, enjoy.
I hear the noise of a rasp chewing wood from Dave's house.... Welcome back buddy, welcome back.
Nice, I haven't noticed it before!
Can you post some photos, I know you are disappointed but I am sure you can save it!
I use a cross bed slide vise and a 1/4" bit to square the corners, much better now.
All that for a free haircut?
C'mon Dave the worst has past, in no time you will be home !
You are right Freeman,3/8 is very close to 10mm 9.6 actually and this is what Bartlett plans recommend.
You are absolutely right!
I check after I read your post and although I first drill the corners with a 10mm drill bit because the plans shows a...
Then I set the template and cut the pick up cavities.
Almost perfect,I will do some sanding tomorrow and it will be as it should....
Set the table of the drill press at 4.4 degrees and make some holes to make the routing easier.
[ATTACH] [ATTACH] [ATTACH] [ATTACH]
Daveeee,Herb is here!!!
You should have get in the hospital earlier so we can meet all together again,Rich -Herb etc...
Lol I am...
Thank you Sir!
C'mon Andre you have some something similar,it is not as bad as it seems... it's worse!:lol::D
I was young when I bought it I used to like the excitement of doing everything my own !:lol:
Hang in there Dave and get well and back to your build soon,I want to hear how the mandolin and the P-bass sounds!!!
I was strangling to continue the wiring of the control box since I didn't look ahead and buy the cables I need before the lock down.
Birdseye with aluminium for me.