Separate names with a comma.
I have "Guitar Tuna" App on my phone that works great and I would probably set up some high pitched feedback and b last until someone got the message.
Don't start throwing out the old tubes in most cases they are better than new tubes! Like others have said clean pots, jacks and such and check...
Strat Am Deluxe with Roller Nut and the Tele is Mx with wide Humbuckers.
If you have used shielded wire to inputs or elsewhere make sure there are no tiny wire frays hanging out shorting. Don't ask me how I know LOL!
Heavy Boat Anchor now LOL!
Great sounding plugged in, not much volume unplugged, I like it! The top is thick to give strength for the Bigsby so it needs amplification.
Heres mine. Made from scraps I had laying around 180 Degrees swing. There is a stepped slot to guide the movable end and a tang on the bottom of...
Put a big bolt through it---or leave it as is!
You can also make a pivot on a router table with a sacrificial piece of plywood. That worked for me. I drilled the center holes and spun the...
Pics when you open it up Please LOL!
Some of my stuff I use for personal at home or with friends and family.
5E3 and 212 Cab
I saw most of this stuff at the Gear Fest! LOL
You can make them re-cut it if it isn't right. Instead of buying something that you aren't happy with. I carry a tape measure.
The New Layout is towards the bottom on Rob's site.
Not all the way though.
I have seen too many of those cheap pancake type go belly up.
Most Lumber places will rip plywood for you to dimension you furnish. Lowes, Home Depot and even combined hardware and lumber stores.
Yes parts availability is a major concern along with capabilities of the table saw. I replaced my cheap Craftsman early this year for a Hitachi...
I guess that rules my builds out with the word "Neat" LOL! With my shaking hands I have to settle for what I can accomplish.
It is not good to keep putting fuses in without fixing the cause cause you might do damage to an expensive component. Most likely a power tube is...
JJs are good for starting up a new build because you don't lose much if you trash any of them. I always remove them once I know the amp is working...
There is a danger that wood grain splits and takes out a big sliver with it. When you climb cut the corners that doesn't happen because that last...
The Harbor Freight Dovetail Jig is made just for dovetails not Finger Joints. It does not have a template that is designed to do them. It does do...
Traps bottom edge and reduces tear out and chipped off wood as cutter tears through material same as the board at back it should contact the...