Separate names with a comma.
Cam clamps are really useful. Use them all the time. Checkout the Paul Sellers’ video on YouTube. I have made about forty or so. They work really...
Thank you to everyone for your comments and suggestions. [emoji106]
New 3/4 3tpi blade arrived today. Installed and guides adjusted. Cutting like a hot knife through butter and dead straight!!!!!!
Delivered to me and I set it up. I have been in touch with the manufacturer. They say to try a new blade? Also, suggest I remove the drive belt...
I’ve ordered a new blade 3/4 3 tpi. I will also make a resaw bar and give it a go. Cheers.
Thanks for the replies to my post. The bandsaw I have is a brand new Record Power BS350s 14”. The blade is a 3/8 3 tpi that came fitted on the...
I have had my new band saw for two days now. Worked really well to cut out templates. Tried to resaw some 6” sapele. Didn’t cut straight, not even...
Yes, it is the bench model, but with a big enough throat to do most of what I need. E.g. through body string holes!!!!
I recently upgraded from a small bench drill to this Jet. Does everything I need and cost just £100 used. Would recommend the Jet.
I was thinking of using it to trim slight overhang (1-2mm x2mm thick) on a ukulele top. I wouldn't use it for routing out pickup cavities or flush...
Can the dremel be used as a flush trim router? If so, what attachments would you need? Has anyone used one for this? Thanks.
Stripped the hole thing down this morning and cleaned everything. Tightened the drive belt and I think this has done the trick. Think the drive...
Hi, more advice needed!!!!! I have an Axminster bandsaw. It has worked fine up until recently, when it seems to slow down and stop mid cut(even...
Has anyone used the type of waterslide decal that dissolves when clear coat is applied, leaving just the actual printed decal with no clear edge?...
Very pleased, will be able to reach those holes for the string through body ferrules now!!!
Just bought this today. Anyone got one?
Finally it is complete. Appears to work well. Very chuffed [emoji106]
Completed shroud and added locking castors so I can move it about the shop. What a difference both of those additions make!!![emoji106]
Yes, that still needs to be done. Got a good Axminster dust extractor to hook up.
[ATTACH] drum true.
Just need to find some hook and loop and paper. Nearly done.