Separate names with a comma.
There are 2 sites for build your own that I know of . The first is https://www.joescnc.com/ and the second is http://www.mechmate.com/
I always thought it was the suction created by well matching surfaces.
You could always use 3 dots.
Eastwood has pin striping supplies
I have the Delta and just planned a 40 by 13 inch blank from 1 7/8 to 1 3/4 and it worked fine.
Would you be able to cut the pattern in the guitar and inlay with contrasting woods. then cut the top curves after inlaying.
Check out Bill Pentz's page for dust collection info
What about Grizzly G0704 or Precision Mathews PM-25mv. Small footprint and can be converted to cnc. Check out Hoss2006 on CNCzone.
Cncrouterparts has a series on designing a guitar in Fusion
Also Andy who posts here has a Fusion guitar as well
Are you sure your nephew wouldn't play the guitar right handed? Lefties often play right handed. I play guitar badly right handed , shoot right in...
Check the debounce setting in Mach3. You can increase it to 2000 to test . It eliminates noisy limit switches. Also check your switches and...
There are several carved top 3d models on Grabcad that you could import into Rhino. Several neck files to.
I'll give them a look
99 % wood but I am trying to cut logos from Aluminum. I would say my machine was fair but needs a much better Z axis to improve.
I have about $4000 in my build including software then I stopped counting. Cutting area is 26 by 44, a liitle short of my design...
A few years ago I built a 31 by 5 inch drum for a sander . That's as far as I got. Going to make a new drum with a 4 inch...
Thanks again everyone. We'll see what comes of it.
I'm thinking of making a drum sander similar to this
Just wondering what is the maximum width of a...
I've been trying different double sided tape and while the one I am now using certainly grips well, the residue seems impossible to remove -...
I found this on my travels
Doesn't anyone ski anymore? It's been a great winter. Waited one morning for the lift to start and it was -33 below Celsius.
I thought you were in Chicago?
Sears might have a replacement part. You never know.