Separate names with a comma.
50 green ones says it's a klone;)
You could pick up a black hammond 1590b put 2 jacks on the side you see and two on the opposite that will be your fx in and out. Wire them...
JF-01 Vintage Overdrive = Ibanez TS-808
JF-02 Ultimate Drive = Fulltone OCD
JF-03 Crunch Distortion = Mi Audio Crunch box
Just googled it and looks like a klon
Like most on here agree it can be a great hobby if your into that kind of thing but....
It will cost you money. It will probably cost more than...
Fine work there. A pedal board in a box:)
Busy weekend, just returned. Glad you got it sorted. Good eyes on TJK;)
No worries, get some pics!
Most would write the voltages like this
Q1 B 0.15v
Sorry, it wasn't 'obvious' to me during a quick skim over the...
More specifically, check you have q1 collector & q2 base joined together.
Those resistors should work ok.
Q1 base : 150mV
Q1 collector/Q2 base : 0.6V This should be 0v check your...
Sounds weird, never had one act like that before. Could you take some pictures so we have enough info to be able to trace the circuit visually?
You might be right, maybe I had a happy accident. Or maybe i have the magic touch. Or maybe I'm deaf;)
I'll try and do another one over the...
Think how much less lawyers would charge an hour if they didn't spend 45 minutes of it on tgp :mrgreen:
Ha! Ya beat me.
Didn't know if i could post link but here it is
I breadboarded one once and don't remember it being noisy at all. I used a 2N2222 in q1 so was probably pretty low gain. Didn't give it much of a...
Wrong forum. can you move me please mods. Thanks!
Came across a schematic for a CJ11 and fancy having a go building one. not sure this is verified so was wondering if anyone can foresee any...
Not anymore. In the last couple of days there has been loads of anti klon stuff posted after the builder started an update thread on ktr production.
Are you going to try a 9v one? Should work (I think) Would be a lot easier
Stair friendly cabs
All ****e in my book, but plenty are making a living out of charging $50 dollars for changing a few components for some others that do the same thing.
Here you go Jefe.