Separate names with a comma.
My copy is #1334
Red lead is normally hot. Black lead is normally ground. Bare wire is always ground . Metallic foil is shielding that connects to ground by being...
You are mistaken to think Kalamazoo made Epiphones were "Budget Gibsons".
I agree with Robert at Rhomco 100%! I bought a 3/8-32 tap from MSC. (You need to find an industrial tool supplier.) Now I use those pretty, little...
Get a new tech.
A Dremel Tool with a cutoff wheel works best for me. A bench grinder works too. Wear eye protection and use the saddle to hold the screw Smooth...
Try: music-electronics-forum.com
My personal opinion when it comes to capacitors is that tonal differences are more in the EYE rather than the EAR of the beholder! I've got a few...
I'm confused. I think you're mixing up your jacks and plugs. I've always thought that not having the plug barrel protrude beyond the surface of...
The 'electrosocket' copies are chromed and look nice, but will not fit a standard Swithcraft or similar "American" jack. I invested in a new drill...
I'm sure the hardware on any Yamaha and other Asian import would be metric sizes. PM me if you don't have any luck. I've got a few spares laying...
Once again....Steel wool and guitars, especially electrics DON'T work well together. Get ultrafine White ScotchBrite. It'll do anything that 0000...
Amen!
OOOPs! I meant 3/8ths by half inch stock!
Like you said, it's scrap material and an experiment! You can always make it larger. Personally, I think it would might look better cosmetically...
Steel wool and magnets don't mix!! Throw it away and get 3M Scotchbrite instead. I've seen way too many guitars with steel wool scrapnel stuck to...
Naptha is the thing for stickers and goo. commercial products like "Goo-Gone" and "Goof Off" are basically the same thing and work great!! Anybody...
The neck screws can, on rare occassion, cause humps to appear on the fingerboard IF the pilot holes are shallow or neck screws are long. This all...
P.S: Keep your tips clean and tinned. Proper heat transfer depends on it!!
Whatever you do, don't use a soldering gun anywhere near a guitar pickup!! Those things throw out a massive electro magnetic field and can really...
'Cause he invested in a deep draw stamping machine and wanted to use it? I personally think he was addicted to machinery and manufacturing more...
I can attest that an aftermarket nickel silver cover fits a GFS Fatbody. I recommend a piece tape be put across the tops of the polepiece to...
I have a '52 reissue that I bought in '98. I made the wiring switch right away. I did not like the tone using the 1Meg volume pot that was...
0000 steel wool is a magnetic pickup's worst enemy!!! I discovered Scotchbrite years ago and never looked back. definately a "better" mousetrap!
