Separate names with a comma.
think the Ac4 is a single ended amp therefore no sag,
glad you sorted your voltages out,
cant see the point of the s/w between 2&3, every old transformer i've used out of old radiogram's etc only have one 240v live feed into the...
finished it, but i was getting a lot of noise/hum from it, changed the plain wire from the 6v6 to the OT to a screened wire problem solved, it was...
i think you'll find that all guitar amp's are not "open back".
yes the cab is nice, i liked the odd shape of it, just noticed what look's like a mark on the side of it but it's just the reflection off my tele...
if you really want to find the optimum size cab try and find this book, it's a bit involved though,[ATTACH]
as i mentioned before the amp is u/s, i only bought it for the cab,
have a lok at this post,
if you check my post's i've converted a few s/s amp's to valve,
i usually just use a 5c1 circuit, i like to keep it simple,
looking in the loft and found this, the postage lable is dated 2014, actually forgot i had it, so another s/s to valve amp is in the work's, cab...
i'll try the 0.0022 and 0.001uf cap's first, if no good i'll order the 0.01uf and 0.0047uf to try,
thank's for the reply,
yes, that 5c1 circuit is the one i've used,
i've ordered some 0.0022uf and 0.001uf cap's to try them,
speaker is a celestion g10s-50, but i tried a few other make's still too much bass,
the only way the p/t could be classed as dangerous would be...
i built a 5c1 clone but it has too much bass, wondering how i could reduce it, thank's,
[ATTACH] [ATTACH] [ATTACH]
i like it, very nice,
need's more graffiti and inital's etc, plus the cigarette burn's aren't long enough, but you're getting there,
a few silica-gel bag's in with the guitar wouldn't hurt, or would it,
bit of a hijack i know but "radiocaster" i've been wanting to make a clone of the "killer ant" amp for a while but cant find a schematic, anyone...
all the bleeding on the edges of the white paint spoil it, should have just used the emblem's and left it at that
that's a cool looking amp, better than the usual square built down to a price thing's,
just demoing the sound of the amp, that's all,
this is at full volume, (camera's breaking up as it's too loud) as i mentioned think i'm being too picky about the very slight hum it has now, the...
this is at about 1/2 volume,
well pulled out all the old wiring and replaced it with this set-up, HT trans+ EZ80 rectifier is out of a tape deck, there's still a very slight...
just a really bad sound clip, i still cant play, and the volume of the amp is overpowering my £20.00 go-pro chinese copy camera,