Separate names with a comma.
good to know. I assumed it would absorb some colour and didn’t want that.
Hey thanks a lot!
Here’s the neck after my last coat of clear.
What do you all recommend for sanding/buffing?
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
I wouldn’t want to spend more. But I’ve gotten Strat guards in the past that were non fender brand and then they don’t fit properly.
So.. any pickguard should work?
I believe changes were made around 2006 in the hwy1s.
[ATTACH] This better?
the necks not screwed in here.
I do not want to pay $65 on one lol
I have a 2009 highway 1 tele. With a 22 fret neck, the over hang covers this gap between the pickguard and body.
When I put in a replacement 21...
I thinking whatever goes on easy, lasts and doesn't need to be reapplied.
As long as it isn't thick, or sticky.
I have tru oil on hand, but am wondering what other oils I should consider for a thin finish?
Mostly between it and say old masters Tung oil?
Thanks I’ll look into that
Going to purchase some sealer tomorrow to ensure I do not stain the wood with toner. Then will try all over again.
Using aerosols cans, how do...
I’m using an aerosol can of nitro, are there tricks to get the spray pattern to be horizontal so I can spray vertically up and down the length of...
Also if I have to restart what is the best way to take everything off?
Or is there a stripper that doesn’t eat the fret markers?
Hey Eric. In your opinion from my picture. Is it going to be way to obvious if I try to colour over it again?
And that my wiping off was too...
Thanks I’ll do some reading. Think this can be saved or needs to be sanded back?
[ATTACH] Yes maple and frets in.
I wiped it off and maybe shouldn’t have.
Had my toner on this neck, and liked The colour I had achieved. Now I went and sprayed clear coat a week later over top and I guess I got too much...
I have a Peter Florence voodoo te60 in the bridge that I’d like a neck pickup to pair with. I’m thinking it’ll be hard to find a te60 neck pickup...
Thanks i think I have some old epiphone pickups kicking around that I’ll borrow their wire.
Oh yeah and I have copper insulation tape under the bridge to the body of the guitar too. And through that hoop of the lug because I saw the local...
Interesting so it’s just this one guitar-my only humbucker guitar that buzzes this much. While my Strat, tele, can cancel more buzz then this...
Yep I do. For the longest time I had it soldered on. Took a Dremel to grind off some finish from the plate and soldered on the ground...