Separate names with a comma.
Neck and middle could also be Highway 1 "upgrade" AlNiCo 3. Resistance readings are about right.
In the Squier section
But with Fender's secret weapon for better tone, the big, black screws.
Some say they do the same job as a metal base plate, others are not...
Telecaster Tex Mex pickups. Original spec.
Part Number: 0050893000*
Description: This pickup was specially designed to add power and punch...
Common problem with 4 way switches is the lever "throw" is longer than the slot in the control plate and the contacts are not fully made in...
Something like this
Two HBs in series is not always a great sound. I would try them in a temporary setup before going ahead.
This is the standard method using the volume pot.
These were originally supplied with imported, prewired pickguards/electronics fitted with Booheung (S. Korea) pickups, 500kOhm pots and 0.05uF...
Fender replacement narrow & tall fretwire 0991999000 is .054" tall and .094" wide it says here...
Not many people know about them but there's a screw fixed thingy called an Electrosocket which you can use to replace the cup and clip socket...
Same for the neck, part code 53779 is pre-2012 '52 AVRI.
S-1 stands for Stealth 1, a switch "hidden" in the volume or tone control. It is 4 separate switches which can be used for many applications not...
Remove the new wire and solder to a cover lug.
Fender have recently started to solder the cover ground (green wire) like this.
Pot metal = zinc based alloy aka zamak. Mixture of zinc, aluminum, magnesium and other odd metals. Composition can vary.
Soft and easy to make....
The Oak Grigsby design is such that when the switch is positioned so that one common is connected to its adjacent lug the opposite common is...
Fret wire descriptions are all over the place.
Fender "Narrow & Tall " sizes are 054" x 094" or 055" x 090" depending where you look....
Oak Grigsby 4 way from a different angle.
AFAIK the same ratio 14 or 15:1
Direct fit with a higher ratio (18:1) from Fender are the vintage style ClassicGear tuners as used on the...
Yes, Fender made a Tom Delonge and more recently there was a Squier version
Never used on Teles afaik
This is a 1959 Hofner Colorama
This is the Fender American Professional treble bleed detail
The Strat bridge tone mod is a single link added to the switch
I wrote this out after fitting my first 4 way. It may help or be a bit confusing.
Position 1 Bridge Pickup Only (switch tip down ie...
It's highly probable that Fender will have records based on the serial number.
I would try contacting them by email with the serial and ask for...
It is useful to compare the 2 images above.
Check the pickup ground wire colors on the volume pot. Australicaster - one is blue plastic covered...