Separate names with a comma.
Cut the nut slot by making 2 cuts with a razor saw then used a chisel made from a small screwdriver. How do you guys make the nut slot?
Had to file edges of the cheap kluson type tuners to get them to sit flat.
Rosewood fretboard with dots cut from walnut.
Truss rod channel routed and headstock thinned
Neck will be made of walnut
Anybody ever use this stuff? It's shellac based so I thought it would work under nitro. It went on kinda rough
Contours roughed in
Single hum 51 style controll plate
Decided to use a basswood body I already had cut out
It's a off cut from a telecaster body that's where the shape comes from. I th ought it would fit the hand reasonably well
It works, lot chaper option than a professional one.
Popped out the peice in the middle of the two cuts with a chisel
I set my skill saw to 35° and cut a couple groves in some scrap wood
I'm thinking i'll make a fret bevel from some scrap sassafrass
Sassafras wood tele tung oil finish[ATTACH] [ATTACH] [ATTACH]
The tele almost complete
That sounds like a great idea. I took this pickguard off of another guitar that was wired reak]lly weird. they had a 5 way switch with a couple...
Seymore Duncan Broad caster pickups
Mounted the neck on the tele
nybody know what voltages I could expect to see on the outputs of the transformer?
What could I have potentially damaged by not using a variac?
Just bought a Voice Of Music 8810 amp it makes no sound tubes do not glow at all. I do not see a fuse that could be blown. Is there anything...
A couple Seymore Duncans . Jazz neck and an alnico 2 pro bridge. I'm not sure how the 3 way switch goes in