Separate names with a comma.
Amazing work for a first amp build! Super clean and tidy. Feels good to make a broken amplifier work again. Now it is much more...
I will contact the man at Classic Tone factory and alert him to this post.
Looks like the socket wiring on the power tube heater circuit at pin 2 and pin 7 is correct.
More pictures with the amp turned the opposite...
Paul Allen's got a V2 Rocket on display.
Thanks for the business.
Looks good. Time to install your wire leads.
There are videos on my site that you may find helpful.
Grounding scheme is correct.
Bias cap gets positive to ground. And make sure that the stripe on the diode points toward the 50 V power line...
Is this what you're using?:
Interesting. Please keep the pictures and info coming.
You have to roll your own down there.
Someone replaced some of the coupling caps, but not all. Some of the wiring is bad. Could have an iffy ground connection. Could be some of the old...
Objective to increase clean headroom with more filtering - ergo a 32/32 uF F&T cap can in the rectifier hole. Solid State rectifier is built with...
[ATTACH] [ATTACH] [ATTACH] [ATTACH]
This project utilizes the standard 5E3 board from a Boot Hill kit. I wanted to see if I could fit the Tweedle Dee Circuit on a typical board. I...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
2 and 8 Filaments on the same horizontal plane.
Just a thought. We sometimes run light bulbs horizontally without a second thought. It seems weird to run tubes that way, but tube data sheets...
Check your input jack wiring. 1M to from tip to ground. shorting switch tab to ground.
Make sure the shorting springs are making full contact so...
Looks great. Nice work.
Tasteful and Masterful Guitar work by George.
Both companies offer quality products. One can mix and match brands so long as the components are correctly mated.
Ground Power Side on the power side and signal side on the signal side. Typically, the third filter cap is dedicated to the signal section.