Separate names with a comma.
Check out “rock lite” if your looking for more realistic looking wood substitute. LMI carries it. It’s lighter and has “grain”
Taylor is using 59x1 and 37x6 from simtec, both full UV cure
I was told from a vendor that fender uses UV cured fillers to get the base coat flat...
I use uv fillers all the time.
Key is thin coats. And remember, if it soaks into wood deeper than light can hit it, it will never cure.
Just call LMII
I have them resaw all kinds of wood that I supply them. As recently as 3 weeks ago.
They may not have that feature available on...
Looks pretty good
I agree with silver face on this one. Tests can be deceiving.
I’ve done this finish many times and I’ll say my success rate was 25%
Even when you...
It’s a real finish. No veneer. Solid mahogany.
I've got one somewhere I drew up on corel. Let me find it and I'll send it to you if you still need it
LMI nailed cheap osb plywood to the cement floor in their warehouse. They did it cause the forklifts were slipping on the wax from wood that’s...
Bought that same saw 10 months ago. I love it. Strong and quiet.
When I do set ups, I use the Peterson iPhone app just for setting intonation. $9
I spray urethane over the board then dress the frets.
I like the way it pops
Rumor has it that next year, pau ferro will be restricted as well...
I use 59x1 daily, with a UV light. When I get some all over tools or tables, I just put them out in the sun and it dries real fast. I have had...
Sim tec has a uv filler (59x1) that dries super fast in sunlight if you don’t want to use solarez.
If you know anyone with a laser cutter, templates are super easy.
We got one at work and now I use it for all my templates on 1/4 MDF....
I bought one. Used it for color two or three times and then it stopped working. Got my money’s worth for sure.
TCP sells one like it for $30 that...
Let me know if you need anything rob. I'm just down the road
I've been using a laser engraver lately. Takes about 20 minutes but it's not touch time.
I built two electric mando's last year, both with wide necks. Definitely more comfortable when coming from a guitar
I like it
It's okay to leave a gap between the adjustment nut and the fretboard with the stewmac rod?
I like it!
Get a better mask!