Search results

After building a 1776 Multiplex Echo c/w the modulation pcb, which I really like for that old school classic pseudo tape style delay (even though it uses a PT2399 chip), I was wondering what other delays / echo diy projects forum members on the tdpri have built. I started playing in bands...

I've just seen this old news story about a guy who had his vintage 1966 Rickenbacker stolen in '96 finally finding (& having to pay a high price) to get back his guitar. https://www.ocregister.com/2013/10/11/after-years-of-vigilance-guitar-player-gets-his-ricky-back/ Anyway it reminded me of my...

After previously assembling a Jazzmaster guitar, in which I bought the unprepared alder body, shaped the contours, routed out some of the cavities, installed the electronics, & finished the body, colour Ocean Turqoise & then bought a neck & set the guitar up I’ve decided to really make my own...

I've sprayed over 1 1/2 cans of nitrocellulose clear lacquer over my Ocean Turquoise Metallic JM but am a bit confused about what exactly to do next, the body has been drying for over a month. Do I finish by sanding with wet & dry paper adding a little washing up liquid, I've read to use 800...

Apologies if this has been covered before or is the wrong forum but here goes...:mrgreen: I've got an old '(90's?) CIJ '62 RI Jazz Bass neck with a truss rod that won't move & there is a very slight twist in the neck. I've tried clamping the neck in a jig for a few weeks which made it...

I replaced the faulty foot switch in my Vox V810 Valve Tone pedal which is a 808 type pedal, it works fine but the footswitch still pops when turned on/off. Maybe the layout I used was not right & causes the popping. :roll: There are a lot of different ways to do wire these up,so I had a...

I've picked up a battered old empty '73 Super Reverb chassis with some corrosion & bit of rust & need to clean it up so I can use it for a Vibroverb build.:mrgreen: I'm just wondering what's best to use for the task, I've scratched away some of the surface rust with wirewool & polished that...