Search results

That’s the plan 👍

Thanks for the reply. I have tried to remove and resolder the connections but die not have any luck, but I am going to try and have a further look at it tomorrow again and will try and clean up some of the connections further. I may try a different soldering iron too. That wiring diagram...

Also just to add, the twisted tele pickups have three wires already connected to the neck PUP for the cover ground wire which is yellow. For the bridge PUP, it has a metal baseplate for grounding so I have not fitted a specific grounding cable. Just for reference, here is also the Fender...

Thanks for the reply 👍 The cover ground from the neck is the yellow cable that is attached to the volume pot, as per the instructions. Out of the two pickups, it is the neck that is working, whilst the bridge is not.

Many thanks for the replies. Just to clarify, yes, it is the neck that is working, and yes, it works in the forward neck position and the series position but nothing from the parallel position and nothing at all from the bridge pickup. So from the forward position (1), the neck works in...

Hi, I’m Dave from the UK. I am currently building my first partscaster and have a query that I was hoping someone may be able to assist with in the wiring a 4 way switch. I decided to opt for a 4 way switch to go with some twisted tele pickups. I am following the diagrams for the alternative...