Separate names with a comma.
Don’t know if this helps or not. I have owned several drri and a few silverfaces some were factory blackfaced. I recently built a handwired dr to...
I’m going to try and source the 6g3 parts.
After trying everything I finally got the ticking to stop. I had to move the lead wire on pin2 v5. No ticking now.
Update, the hum is pretty much resolved, thanks everyone. Just one more issue is driving me nuts. The tremolo/ vibrato is ticking. I have tried...
Would the transformers I have work with the 6G3?
A Marshall would be nice. Which models fall into the 18 watt category?
I forgot to mention I have these laying around doing nothing. I don’t know if and what builds they would work on. I used the same ones on my 5e3...
I know it’s crazy, I just finished my deluxe reverb build but I have the bug. So far I have build a 5e3 and a blackface deluxe reverb. I want...
Sorry haven’t responded. The hum is pretty much gone, only issue now is the tremolo is ticking. Reverb is working as well.
Got rid of the ground bus, replaced 25uf on bias board with a 50uf, now need to redo the filter cap board to add a longer ground wire to get it...
The doghouse ground is the black wire on the left where the two black wires are on the ground bus.[ATTACH]
Also would any others ground issues be the reason the reverb isn’t working?
Thanks everyone I’m going to try all the suggestions and see what happens
Yes the wire is connected to the food on the board. I’ll triple check the wiring under the cap can.
I’ll get rid of the ground bus and see if it helps. I was under the impression it was best to have one
Ok that wire is not connected.
This is how I wired it. [ATTACH][ATTACH]
This pic may show it better it was taken before I installed the ground bus. [ATTACH]
There is a ground the black wire going to the one jack and two 68k resistors connected to both jacks
I did a continuity test on all the leads and the ground bus all checked ok. I also double checked ever resistors value to make sure they were in...
[ATTACH] [ATTACH] [ATTACH] [ATTACH]
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Here is my DR build at idle is with nothing plugged Into it has a bad hum. I checked all the connections and installed a ground bus and tried...