Wally

Do you happen to know how to decode this Gibbs pan? Need to know if it'll work in my '66 Fender Reverb unit. Thanks!

https://www.ebay.com/itm/Vintage-Gibbs-Reverb-Tank-harvested-from-1960s-Hammond-M3-Organ-/353634895199?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

Wally, you mentioned the GP article about a Bassman Mod. Could you send me a link? Thanks!

In a post back in 2007 you mentioned you had a tiny Teisco amp with 2X6AQ5 power tubes, trem, reverb, and 2x5" speakers. Do you remember what model it was? I did some research and can't find anything even close to that for some reason! Thanks!

Awesome...I'm Jason Hayes. I was in Lubbock from 1995-2000 and you helped me many times with repairs and such. (My friend Cody McClain recommended you to me) I bought a 66 Bassman from you once. Are you still in business? I enjoyed coming to your store. I've never given it up and am working on a new band currently here in Dallas

Hey Wally
I'm curious about something...
You wouldn't happen to be Wally from Wally's Guitar Garage in Lubbock, TX?

Ok, if you thought that was a tough one, I'm now looking for a bridge cover for my '67 with original Bigsby. Have one for my '74 Thinline Bigsby, so I know they exist, but... Looks very similar and maybe even be the same as Jaguar/Jazzmaster bridge cover, but again, I'm not certain. Do you happen to know?

Hey Wally,

Received the bridge cover yesterday. Looks great, fits great, no issues. Thanks again for helping me out!

Paul

Hey Wally,
I would be interested in one of those vintage strat bridge covers if you can spare one. If you wouldn't mind sending me a quick photo along with a price you would want for one, I'm sure we can work a deal.

Thanks so much for helping me out with this,

Cas

I saw that you had one in a previous thread and was hoping you might could help. This is pretty close to a complete build. My first issue is sourcing the correct replacement transformers and I understand that the 5b5s were the last pros to have a choke, looking at the schematic it's not making sense to me where this goes . Thanks for any help

Hi Wally I'm a novice but a person close to me passed away and left me a 5b5 pro ...sort a... Seams like someone had gone through and mutalated it...I would like to put it back to being a 5b5.

hi, Schmee tells me you might know where I could find a potentiometer for a Lab Series amp (L11). thanks for any info you might have

Great tone but it always seemed like it’s lacking in volume/gain. His has been serviced

Can these amps be made louder/gainier ?

Hey Wally -
I know you have one of those little Rickenbacker amps w/the copper chassis (I forget the model name - B9 ?) I might buy milocj’s Electro version of the same amp
Thanks ! Mike E

Hi, Do you still have fender Vaporizer schematic?

Thanks for your prompt reply. I cross my finger you will find Oxford.

Dear Wally, I’m desesperatly looking for a speaker Oxford 10k5. I know you were ask for it some years ago. By chance I only need one, do you think it’s possible?
Many thanks

Hi...I saw your post awhile back on Reverb Tank, inducters loose and applying super glue. I have a Marshall Reverb 12. The reverb springs are inside the chassis. I am getting a low ringing of these springs at higher volumes.
When you say inducters...are they the little squarish pieces of plastic wrapped in wire like a coil? If this is what you are referring too, but I will try if they are...thanks!

Hey Wally, I'm located in Lubbock. Do you have any vintage tube amps for sale at the moment?

Thanks,

Brandon

Hey Wally, would you text me your address.... I'm getting closer to having the coin to have you service my Princeton NR. We talked about this a while back.....I'll order the cap can as you suggested...... Also would you need my tubes?
Thanks
Greg