Ronno25's latest activity

  • Ronno25
    Ronno25 replied to the thread Reverb 6G15 clone doubts.
    @Lowerleftcoast It uses a full wave. The same as in post #23 above. I'll give a shot wiggling those B+2 wires. They may be really tight...
  • Ronno25
    Ronno25 reacted to Lowerleftcoast's post in the thread Reverb 6G15 clone doubts with Like Like.
    No, these are all relatively short distances as far as loss due to length (resistance) of wire. Even though the ground wires will meter...
  • Ronno25
    Ronno25 replied to the thread Reverb 6G15 clone doubts.
    @Lowerleftcoast The reservoir cap and the other filter caps are in the doghouse on the back of the chassis. The preamp filter cap is...
  • Ronno25
    Ronno25 replied to the thread Reverb 6G15 clone doubts.
    I built my 6g15 like this and also used hum blocker buffer, grouping all my power amp and preamp leads separately on the buss bar. The...
    • WhatsApp Image 2022-02-16 at 8.56.47 PM (1).jpeg
    • WhatsApp Image 2022-02-16 at 8.56.47 PM.jpeg
    • WhatsApp Image 2022-02-14 at 1.22.29 PM (5).jpeg
  • Ronno25
    Ronno25 replied to the thread Reverb 6G15 clone doubts.
    I think you've got a ground loop that you'll want to eliminate. I put a red X on it below. Also, I may be dense, but I thought it was...
    • Screen Shot 2022-05-20 at 1.20.12 PM.png
  • Ronno25
    Ronno25 reacted to Lowerleftcoast's post in the thread Reverb 6G15 clone doubts with Like Like.
    Yep, if both the shielded cables are connected to the chassis and the reverb tank chassis it will make a ground loop. Lifting one side...
  • Ronno25
    Ronno25 replied to the thread Reverb 6G15 clone doubts.
    This thread is really helpful. I'm following along here, as I'm trying to fix an annoying hum I have in my 6g15 that increases as the...
  • Ronno25
    I should mention that I play most of my amps on 10. The higher the volume the louder the hiss. At 1-2 volume you wouldn't hear much if...
  • Ronno25
    Hiss is completely normal. I wouldn't think twice about this. All my tube amps have some hiss. The vintage ones have A LOT of hiss.
  • Ronno25
    I'm planning an 18w lite build. I'll be using a chassis that already has PT and OPT , a few tube sockets, and appropriate place for a...
    • 18wattLite2b.gif
    • 18w Marshall liteiib AO44.png
  • Ronno25
    Ronno25 replied to the thread 5F10 FUN.
    I'm not at home for the next two weeks or so otherwise I would record you a sound clip. The sound isn't a night and day difference, but...
    • 5F10-32s.jpg
  • Ronno25
    Ronno25 reacted to screefer's post in the thread 5F10 FUN with Like Like.
    Love meddling! This is the first I've heard of this. I was under the impression that the third input was unnecessary because you could...
  • Ronno25
    Ronno25 replied to the thread 5F10 FUN.
    I don't mean to meddle with your plans but worth mentioning is that if you do have 3 inputs you can jump input 2 and 3 with a guitar...
  • Ronno25
    well i mean, the quintessential would be just to work from a marshall 1974X schematic directly and then just omit the tremolo...
  • Ronno25
    Okay, looks like you have to create account and login to access downloads at 18watt :rolleyes:. Thanks guys.




Top