pavel's latest activity
-
PI fixed it!! And I feel like an idiot for not catching it sooner. When I heard the RF leaking through the amp I started thinking about...
-
PHi everyone. I just got done building my JCM800 Micro EF80 and have a small issue with the input wiring. When the guitar is plugged into...
-
PHere are a few pics of today’s progress building the cabinet for the amp head…
-
Ppavel reacted to Lowerleftcoast's post in the thread Question about 5F1 baffle grille cloth stapling with
Like.
Also the chaffing/bumping on the edge of the speaker cutout makes a circular indentation on the fabric. Unsightly to me. OMMV. -
PI just finished my first build this past winter, and it turned out great. I built the cabinet from scratch, and got the Mojotone 5f1...
-
Ppavel reacted to Killin5's post in the thread First Time Amp – 5F1 Boot Hill and Cabinet Build with Like.
Grill Cloth After I got the sides done, I went back and added any additional staples I needed. I took a tack hammer and hammered the...
-
PBartel Amps uses hide glue on their cabs. He uses a steamer as part of his process. Seems to work rather well and his tolex work looks...
-
Ppavel replied to the thread Tweed covering with hide glue?.Perfect, thank you Jason, this is super helpful. I like Behlen's as well, for one it comes in a nice can rather than a plastic bag...
-
PFWIW I found this when I was searching for Behlens, since you mentioned you couldn't find it anymore... and you're right cause I can't...
-
PI heard my name called! I used Behlen hide glue that I mixed with hot water for several, but when that can ran out I couldn't find it...
-
PI am getting ready my first tweed covering job on my Champ cabinet and I'd like try to use hide glue like back in the day for some extra...
-
Ppavel reacted to wangdaning's post in the thread Rob Robinette's Micro Champ EF80 Power transformer EU equivalent question. with Like.
I used the former and it works fine. If your chassis does not have a cutout for an IEC connector I would go with this method (unless you...
-
Panother idea for this: split / parallel B+ supplies? please feel free to comment on how terrible this idea might be..
-
Ppavel replied to the thread First amp build - Rob Robinette's Micro Champ.That's pretty impressive for a hand built Chassis.
-
Ppavel reacted to YorkshireSimon's post in the thread First amp build - Rob Robinette's Micro Champ with Like.
Much happier with the simpler chassis. Mounted most things now. Starting to look quite smart, if I do say so myself 🙂
