Separate names with a comma.
+1 on that.
I had that happen on my tele and some sandpaper fixed it right up
I have the Duncan Seth Lover set in my AS73.
Recently had the itch to change it out for some toneriders but decided against it after long...
I had the reignmaker in a Marshall amp. It sounded pretty good when it was working.
It stopped working within after about a year of use
Congrats on the amp!
It will be adequate for jamming and practicing around the house. As a bonus, you'll have great tone to boot
Nice work. Really nice
If I recall correctly, P90s have bar magnets which are similar to humbuckers.
But, if you use the same pickup height as you would in a humbucker,...
Jay Mitchell, of which you can search online for his credibility, recommends what is now known as the Mitchell Donuts.
It is essentially using...
Like you, I have the older combo and curious about the newer heads.
However, I could find no real reason to get the head because the all the new...
Great.. Thanks for that
Another vote for the RAT
Would it be an ECC 823 or 832? I'm asking because I have that amp and would like to experiment with this valve.
There was a mega thread about the Mitchell donuts that I have followed some time back and my understanding was quite clear that this is the way to...
I have the 50w Weber mass for use with my DSL40C. On the occassion when I have the master on 7 in Lead 1 in 40w mode, the attenuator gets too hot...
Would cut through quite nicely and pleasantly.
I used to GAS quite badly for one during my semi hollow crazed years.
I learnt that Hamer makes great semi hollows and searched high and...