Separate names with a comma.
The first one is pretty much all done. Still needs a truss rod cover and custom knob and switch tip, but it will do for now. I did have...
So it's been a while since I posted on these. I've been doing the grain fill and sealing while waiting for the weather to cooperate...
Played a really great show this past weekend and got some great shots of the guitar lit up![ATTACH] [ATTACH]
Finally got a 2 way mirror top that was decent. Made the insert and I think it turned out great![ATTACH] [ATTACH]
Here's a Strat-ish version that I did a while back. [ATTACH]
Got the beauty shots today.
And now on to the next one :D
And then I started cutting up the wood.
Unlike the previous one, which had a very plain neck, I decided to use a slightly flamed piece...
Shaped the neck today;
And applied the first oil coat to the newly shaped parts.
The cut-away is a bit deeper than...
Chiseled out the neck pocket to match the recessed root, off-set towards the bass side a bit, to allow a bit more room for heel shaping....
Sanded the body-
[ATTACH] ...and rounded the edge
[ATTACH]....Layed out the bridge and pickups on the top, and decided the contrast was...