Beebe's latest activity

  • Beebe
    Beebe reacted to highwaycat's post in the thread Any Tips on Tightening Pots? with Like Like.
    No I put a star washer and second nut below the pickggaurd then the other nut on top of the pickguard. Is the knob spinning freely...
  • Beebe
    Beebe replied to the thread Any Tips on Tightening Pots?.
    Nope. I'm not having any problems once installed. Just curious about how others are installing pots. I really like to keep the pots...
  • Beebe
    Beebe reacted to bobio's post in the thread Telecaster Electro socket with Like Like.
    It is pressed in. You would have to buy or make some kind of puller. Something similar to this from Stewmac. Rather than the fitting on...
  • Beebe
    Beebe reacted to bobio's post in the thread Telecaster Electro socket with Like Like.
    Rutters Cup Rainbow :cool: https://ruttersguitars.com/rutters-cup These are just some of my personal Teles, have put the Rutters Cup...
  • Beebe
    Beebe replied to the thread Telecaster Electro socket.
    How do you remove the Rutters Cup? I'm thinking about trying these out but would like to know how to remove it first.
  • Beebe
    Beebe replied to the thread Any Tips on Tightening Pots?.
    I think this is what I was looking for. Do you ever use the thin wrench on the built in nut? It looks like you may not be able to...
    • CTS Pot Nut.JPG
  • Beebe
    Beebe replied to the thread Any Tips on Tightening Pots?.
    Not patronizing. I'm embarrassed to admit that there is a chance I have not been paying attention to the orientation of the lock washer.
  • Beebe
    Beebe reacted to no doz's post in the thread Any Tips on Tightening Pots? with Like Like.
    star washer / ESP multispanner has served me so well
  • Beebe
    Beebe reacted to schmee's post in the thread Any Tips on Tightening Pots? with Like Like.
    You need the star washer under there. I just tighten with a socket in my fingers and hold the pot with a finger or two.. With the star...
  • Beebe
    Beebe reacted to Boreas's post in the thread Any Tips on Tightening Pots? with Like Like.
    I have never used anything other than fingers on Fender stuff. If you are using a star washer, snug is fine.
  • Beebe
    Beebe reacted to Sparky472's post in the thread Any Tips on Tightening Pots? with Like Like.
    Same as above. You should be able to tighten just holding the pot in place with your fingers. If you’re bending anything you’re over...
  • Beebe
    Beebe reacted to Peegoo's post in the thread Any Tips on Tightening Pots? with Like Like.
    An internal star washer, slipped over the pot threads, and then installed. Use a flat washer and a nut on the outside. They don't need...
  • Beebe
    Beebe reacted to guitarbuilder's post in the thread Any Tips on Tightening Pots? with Like Like.
    Lock washer underneath in the body and a nut driver/socket that is long enough to fit over the shaft. Snug but not tight. I get CTS...
  • Beebe
    Beebe reacted to Telekarster's post in the thread Any Tips on Tightening Pots? with Like Like.
    Do you have the multi point lock washers under the nut side i.e. the type that look like a "star"? I do, with a washer below it to...
  • Beebe
    Beebe replied to the thread Any Tips on Tightening Pots?.
    I do use multipoint lock washers with a regular washer below it, and sometimes a nut below that when the the knob needs to sit a little...




New Posts

Top