Separate names with a comma.
No guesses eh? Anyway the buzz is transformer EM. Too close to the reverb tank.
An interesting sound. I have had this thing mostly assembled for a bit now and come in to play with it between the other less interesting parts of...
So I see on your "Grounding Suggestion" that center tap of both the Primary and the Heater are used to elevate the ground. My transformer does not...
Start up question regarding the 6g15 build. May seem like a silly question but will I need a dummy load like you do with an amp start up?
Your interest and enthusiasm is appreciated. Thanks
I'm at it again. stumbling blindly into another build knowing nothing at all about what I'm doing. This time it's a 6G15 type reverb. Any words...
Man Successfully Reinvents the Wheel Complete story on page 4. Nathon Anglin, avid do it yourselfer and self-proclaimed genius says that he,...
What are your thoughts here? I would like an FX Loop and I would like the cascaded channels that robrob has on his website. I would also like...
Found A problem if not the problem. V-3 and V-4 screen resistors on B+2 are 470K instead of 470 ohm. Amateurs:rolleyes: I was only off by a couple...
Ok, the wife got deployed to Alaska for the fires up there so had to take care of that stuff first but I have some voltages readings now. And I...
6.3VAC is good. Yes I did mean 15mA not .15 and that is per tube. I charted out the voltage last night and will post it tonight when I get home....
Help! I'm at a loss here. I have been through this a few times now. I have removed all the mods to the fender original schematic I based this off...
how about as a stand alone unit?
Here it is, the "As Built". in going over everything I found that I had failed to connect CL60 to C14 on the Neutral post of the wall power but...
