Looking for a way to have a simple setup in a Thinline Tele; wanting tele bridge & humbucker neck... Want to do a 4 way that would allow the following: Bridge Bridge & neck (in phase / normal) Neck Bridge & neck (out of phase) Single volume & single tone pots, no mini switches or push / pulls wanted; hence the 4 way thought... I see a bunch of stuff on series / parallel, but nothing on in phase / out of phase with a 4 way blade switch... Anyone have some insight...? Thoughts towards pot values (250k vs. 500k) & capacitor values...? All this with a treble bleed setup...? @Deaf Eddie ???