The wood was cut and sanded. Small amount of linseed oil was applied for pore filling, but too small to have an effect actually. The picture was drawn on the wood (black acrylic paint) by my own self. Then the wood was stained with some pine lazur grabbed from the shop at the corner. Then finished with gloss acryilc finish from spray cans (never do that! it costs a wealth, and hardens SLOW... buy/get a decent sprayer they you can mix your own laquer)
The neck was finished with 10-15 thin layers of fine linseed oil. It's awesome in look, it smells for a year like foodstuff, but after then it's ok.. :)
The words Fender®, Telecaster®, Stratocaster® and the associated headstock designs are registered trademarks of the Fender Musical Instruments Corporation. The TDPRI is an independent, member supported forum and is not affiliated with Fender Musical Instruments Corporation.