Separate names with a comma.
Did Robs nfb switch on my 5e3 and I gotta say it's pretty great in general and takes pedals better highly recommend to any one building one....
Haven't tried yet just bought it .I'm going to contact mss
Anyone got any info on the dimple in dust cap.1962 jensen p12n reconed by Memphis speaker services
Picked these up for 1.99 worth putting in.they are brand new
On a side note how high should I go.or just buy a weber
Hey guys thanks for the reply.I was chopstick in around with volume up loud and it stopped I think it was the yellow wires to rectifier moved them...
New boothill uild sounded fine last couple days now when I really dig in I get a static sort of noise not sure if it's speaker or curcuit
Holy crap this thing breathes fire!!!!!!!!
Bright ch dimed,normal ch 8,tone 6,into bright channel fantastic.
Hey rob, no I think I it looks ok now that I did some research. 6v6 looks kinda bright though. Here are the voltages there a bit high. But just...
Hey mack thanks man. It's a rca.rest of tubes should be here today
So I fired it up pilot light came on.
Voltage with just rectifier tube in
Pin-2 and 8 together 5.2vac
Pin-2 to ground 401dc
Pin-4 384ac pin 8...
Hey Dave I just got done a Boothill 5E3 if ya get a chance could you please give it a once over thanks
Rectifier and spare
Only on the LV heater wires? No continuity on Hv wires that has grounded CT
So I was messing around with the meter checking continuity on the grounds and touched the pilot light wires and I have continuity from chassis to...
Finally was able to get back to work
Pots wired. Any tips on soldering small wire on the pot lugs like the 500pf on the tone
ya mack that's it 4inputs to the chassis ,tone cap to ground on volume and tone ,both volumes with a wire to ground bus.
am I over simplifying it
Add leads from 68k resistors and input Jacks are done I think
Hey rob if not to busy think you could check my board out
And ground bus
Hey Dave if u get a chance check my board out
Back of board