Separate names with a comma.
I have been using open G exclusively for the last 7 years , before that the electric guitar was dead to me because i was looking outside for...
Would it be considered Travis picking if its blues in open tuning ?
Thanks slappy i do my best on the guitar anyway , not the video editing ...
I had good success with changing the middle reverse wound pickup to the bridge position , and used neck&bridge and mid&bridge in series. But when...
I was thinking of having a second pickup in series on a second switch . With a Fender type pickup in the neck position it would give me 6...
I was wandering if the video was to long ? so is it ?
Hi Guys i made a second video demo of overwound vs underwound , it better shows the variations , enjoy !
I did some reshaping of the body , to improve upper neck access not easy if like to keep looking authentic at least from the front .
Wow what is that resonator made of a frying pan ? That's a special one , i bet its fun to play.
On the first picture you can see one line left by the fret saw depth guide , there used to be one on each fret , i ironed them out . I glad it was...
Someone tried to refinish it and screwed up the the neck pocket , its pretty much done ..fire wood
That's a good idea ! but will it really make a difference ?
The first neck fretted is at the back , on the second i did not remove the marks left by the fret saw depth guide , the next on i cleaned the mars...
This is the donor guitar , and the frets are installed on most necks.
The neck with the last dot replaced and it .975 thick .
I scavenged some part from a kawaii made guitar , plus some of the parts i was not planing on using and we have a project !
I made a few tools , some rockers , notched straight edge and a short sanding beam. I used a marble threshold . I started by fretting a neck i...
I fixed the neck , and completed the radius on the other ones .
I tried to make a 12 inch radius with a sanding block but since the fretboard is already cut to size it took far less time to do the head side...
I am keeping busy ! Radius and frets tomorrow...
some more today!
After seeing how dirty the tape is i don't regret using it.
All done !
I completed the vintage type shaping of the head stock , now its time for some fret work .