Separate names with a comma.
The Mexican Deluxe Nashville from 2000 to 2015 used the 6 saddle Fender 4 screw vintage style bridge.
The 2016 Mexican Deluxe Nashville uses a...
A more durable method would be to engrave the letter cutting through the white top layer of the pickguard exposing the middle black layer.
This any help? The gray blobs are solder joints.
The volume pot bent lug is soldered to the pot case. The output jack ground can be soldered to...
It's not shown on the diagrams but I think you will need to split the neck pickup black from the cover and solder a new cover ground going to the...
The plug is an integral part of the Fender Bi-Flex system.
Fender CS made a Custom Classic Tele with reversed plate 4 way. Slightly different to the normal 4 way arrangement as neck only is pos 4 not 3....
Probably ok for 1/4" shaft CTS pots. The Allparts drawing is confusing, 1/4" is 6.35mm not 6mm
Try Q-Parts website, $8 + $4.95 shipping...
Best reliable and stable tuners imho are Gotoh SG381. Try Ebay for them, should be around $36 a set.
String clamps are also called string retainers.
The Fender pg is part number 006-8217-000.
This is something that we need to shout about.
One of the most valuable sources of wiring diagrams has gone. IT IS IMPORTANT!
Probably a Squier Vintage Modified SH body. Neck pickup type is correct but the controls seem to have been replaced/upgraded.
PJb4 posted the same problem in Tele Home Depot...
CTS Fender pots are usually made in Taiwan The left hand one is Fender part 0038950000, 500kOhm
I would also check the D'Addarios against this